[mrtg] Re: Sample config for CPU usage on cisco routers?
Aguet, Pierre
Pierre.Aguet at btgppt.com
Fri Mar 8 07:57:20 MET 2002
Hello Taylor,
You need one config (can be several OIDs) per router, but you can put all
these configs in only one .CFG file.
--- Start .cfg file
** config router 1
** config router 2
** config router 3
Etc.
I use to monitor WAN traffic, LAN traffic (if needed) & CPU useage for every
routers I have.
Depending on the routers setup, the number of entries (OIDs polled) can
vary.
HTH
Pierre
-----Original Message-----
From: Taylor Lewick [mailto:Taylor.Lewick at us.fortis.com]
Sent: Thursday, March 07, 2002 6:52 PM
To: Aguet, Pierre
Subject: [mrtg] Re: Sample config for CPU usage on cisco routers?
Pierre, how would one specicfy that config to run on mulitple routers...?
Taylor Lewick
Unix System Administrator
Fortis Benefits
816 881 6073
"Help Wanted. Seeking Telepath..."
"You Know where to apply."
>>> "Aguet, Pierre" <Pierre.Aguet at btgppt.com> 03/07/02 02:23AM >>>
Hello Bill,
I see on your cfg file that you monitor twice the same OID.
But you specify monitoring once the 5 minutes & once the 1 minute counter.
Are you sure you monitor the correct stuff.
Here is my cfg for CPU monitoring:
#### CPU measurment
#### 1.3.6.1.4.1.9.2.1.56.0 = CPU usage permanent
#### 1.3.6.1.4.1.9.2.1.57.0 = CPU usage average 1 Minute
#### 1.3.6.1.4.1.9.2.1.58.0 = CPU usage average 3 Minutes
Target[router.cpu]:
enterprises.9.2.1.57.0&enterprises.9.2.1.58.0:community at router
Title[router.cpu]: (Router name): CPU Utilisation
PageTop[router.cpu]: <H2>CPU Utilisation</H2>
<TABLE>
<TR><TD>System:</TD><TD> Cisco 1601 </TD></TR>
<TR><TD>IP:</TD><TD> aaa.bbb.ccc.ddd</TD></TR>
</TABLE>
Options[router.cpu]: growright, gauge
Unscaled[router.cpu]: dwmy
MaxBytes[router.cpu]: 100
AbsMax[router.cpu]: 100
ShortLegend[router.cpu]: CPU
YLegend[router.cpu]: CPU Utilisation
Legend1[router.cpu]: Average CPU load 3 minutes (Long)
Legend2[router.cpu]: Average CPU load 1 minute (Short)
LegendI[router.cpu]: Long
LegendO[router.cpu]: Short
Rgds
Peter
-----Original Message-----
From: Bill Slater [mailto:bill.slater at deerfield.com]
Sent: Wednesday, March 06, 2002 9:50 PM
To: RCayton at horine.com; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Sample config for CPU usage on cisco routers?
Hope this helps:
###cpu UUNet 2611
Target[cpu.ip]:1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:community at i
paddress
XSize[cpu.ip]: 300
MaxBytes[cpu.ip]: 100
AbsMax[cpu.ip]: 100
Options[cpu.ip]: gauge,nopercent
Unscaled[cpu.ip]: dwmy
YLegend[cpu.ip]: Utilization
ShortLegend[cpu.ip]: %
LegendI[cpu.ip]: 1 Min:
LegendO[cpu.ip]: 5 Min:
Legend1[cpu.ip]: AvgBusy 1 Min
Legend2[cpu.ip]: AvgBusy 5 Min
Legend3[cpu.ip]: AvgBusy 10 Min
Legend4[cpu.ip]:
Title[cpu.ip]: Production (UUNet) 2611 router CPU Utilization
PageTop[cpu.ip]: <H1>Production (UUNet) 2611 router CPU Utilization</H1>
Bill Slater
-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of RCayton at horine.com
Sent: Wednesday, March 06, 2002 3:33 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Sample config for CPU usage on cisco routers?
is there anyone here who would like to share a simple cfg file that can
monitor cisco cpu usage. i have one working but it just isn't what i want.
having problems with values still showing up as bandwidth and such.
Thanks
Ryan
Ryan Cayton
Technical Analyst
Horine and Associates, LLC.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
****************************************************************
Please Note
The information in this E-mail message is legally privileged and
confidential information intended only for the use of the
individual(s) named above. If you, the reader of this message, are not the
intended recipient, you are hereby notified that
you should not further disseminate, distribute, or forward this E-mail
message. If you have received this E-mail in error, please notify the
sender. Thank you
*****************************************************************
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list