[mrtg] Urgent Help Required-----newbie

[Paul.Curwen at solent.ac.uk]

Here is my CFG file

### Global Config Options

WorkDir: c:\mrtgdata
LogDir: c:\mrtgdata\logs
HtmlDir: c:\mrtgdata\html
ImageDir: c:\mrtgdata\images

### Global Defaults

RunAsDaemon:Yes
Interval:5

#  to get bits instead of bytes and graphs growing to the right
Options[_]: growright


#####################################################################################################
# System: SI-SSR16
# Description: SSR 8600 - Enterasys Networks Firmware Version: E8.2.0.0
PROM Version: prom-E3.1.0.0
# Contact: AIS
# Location: ML305
#####################################################################################################

 ## Interface 1 >> Descr: 'port number: et.2.1' | Name: 'port number:
et.2.1' | Ip: '' | Eth: '' ###

Target[Staffuser]: 1:mrtg at 194.81.146.1:
SetEnv[Staffuser]: MRTG_INT_IP="" MRTG_INT_DESCR="port number: et.2.1"
MaxBytes[Staffuser]: 12500000
Title[Staffuser]: Traffic Analysis for 1 STAFFUSER SERVER
PageTop[Staffuser]: <H1>Traffic Analysis for STAFFUSER SERVER</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>SI-SSR16 in ML305</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>AIS</TD></TR>
   <TR><TD>Description:</TD><TD>port number: et.2.1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>Ethernet (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>port number: et.2.1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>100 MBytes/s</TD></TR>
 </TABLE>

Target[Libstaff]:
1.3.6.1.2.1.31.1.1.1.3.9&1.3.6.1.2.1.31.1.1.1.5.9:mrtg at 194.81.146.1:
MaxBytes[Libstaff]: 2500000
YLegend[Libstaff]: Broadcasts
ShortLegend[Libstaff]: Packets
Legend1[libstaff]: Broadcasts Received
Legend2[libstaff]: Broadcasts Transmitted
Legend3[libstaff]: Max Received Broadcasts
Legend4[libstaff]: Max Transmitted Broadcast
LegendI[libstaff]: Received Bcasts
LegendO[libstaff]: Transmitted Bcasts
Title[libstaff]: Broadcast Statistics for Mountbatten Staff Gigabit Feed
PageTop[libstaff]: <H3>SSR 8600 gi 3.1 - Broadcast Statistics</H3>
Options[libstaff]: absolute
Colours[libstaff]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[libstaff]: ymw


I get loads of errors when i run it from a perl cmd prompt

Bareword at line 7  where operator expected and just about every line after
that.

Everything seems alright.....any ideas ???





Paul Curwen
Network Engineer
Networks & Telecomms Team
Southampton Institute

Tel 02380 319985

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi