[mrtg] Re: Rmon

[Erik Jacobsen]

Recently, I was reading on the Cisco Website that only the 2500 series routers supported RMON.

Cheers

Erik Jacobsen

-----Original Message-----
From: Yigal Korolevski [mailto:yigalk at flashmail.com]
Sent: Monday, May 20, 2002 5:28 AM
To: mrtg
Subject: [mrtg] Re: Rmon



Pix doesn't support RMON. Cisco2600 might support it with the right
IOS image (Cisco2500 had such images) not sure if Cisco supports this.

My advice is to place an RMON probe on one of the inerfaces (PIX or
Cisco2600) and gain access to the probe through an interface that 
is not currently connected to the routing device (to avoid influence
on the real traffic from your polling of the probe).

        HTH,

		Yigal

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi