[mrtg] Re: Target does not make sense
Andy Lewis
Alewis at greenfield.com
Wed May 22 23:42:37 MEST 2002
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Notepad. It works when I manipulate minor things in my existing =
configuration files. I also have Zeus for windows but I haven't used it =
yet to edit.
=20
=20
=20
=20
=20
-----Original Message-----
From: Chris Burton [mailto:Chris.Burton at dig.com]
Sent: Wednesday, May 22, 2002 5:37 PM
To: Andy Lewis; Jerry Heidtke; MRTG at list.ee.ethz.ch
Subject: RE: [mrtg] Re: Target does not make sense
=20
=20
-----BEGIN PGP SIGNED MESSAGE-----=20
Hash: SHA1=20
What are you using to open the config file with and save it?=20
Chris Burton=20
Network Engineer=20
Disney Internet Group: Network Services=20
206.664.4833=20
425.591.4805=20
=20
- -----Original Message-----=20
From: Andy Lewis [ mailto:Alewis at greenfield.com]=20
Sent: Wednesday, May 22, 2002 2:31 PM=20
To: Jerry Heidtke; MRTG at list.ee.ethz.ch=20
Subject: [mrtg] Re: Target does not make sense=20
I Still the same error.=20
=20
Andy=20
- -----Original Message-----=20
From: Jerry Heidtke [ mailto:jheidtke at fmlh.edu]=20
Sent: Wednesday, May 22, 2002 5:22 PM=20
To: Andy Lewis; MRTG at list.ee.ethz.ch=20
Subject: RE: [mrtg] Re: Target does not make sense=20
Try this for a target=20
Target[cpu.1]:=20
.1.3.6.1.4.1.9.2.1.58.0&.1.3.6.1.4.1.9.2.1.58.0:Community at x.x.x.x=20
Note the space before the first OID, and the dot beginning each OID.=20
Jerry=20
- -----Original Message-----=20
From: Andy Lewis [ mailto:Alewis at greenfield.com]=20
Sent: Wednesday, May 22, 2002 3:19 PM=20
To: MRTG at list.ee.ethz.ch=20
Subject: [mrtg] Re: Target does not make sense=20
Thanks for the Quick response.=20
I tried it again and got the same error.=20
Here is the code and I don't see any breaks.=20
=20
Target[cpu.1]:1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:Community@=20
x.=20
x.x.x=20
RouterUptime[cpu.1]: Community at x.x.x.x=20
MaxBytes[cpu.1]: 100=20
Title[cpu.1]: CPU LOAD=20
PageTop[cpu.1]: <H1>CPU Load %</H1>=20
Unscaled[cpu.1]: ymwd=20
ShortLegend[cpu.1]: %=20
XSize[cpu.1]: 380=20
YSize[cpu.1]: 100=20
YLegend[cpu.1]: CPU Utilization=20
Legend1[cpu.1]: CPU Utilization in % (Load)=20
Legend2[cpu.1]: CPU Utilization in % (Load)=20
Legend3[cpu.1]:=20
Legend4[cpu.1]:=20
LegendI[cpu.1]:=20
LegendO[cpu.1]: Usage=20
Options[cpu.1]: gauge=20
workdir: c:\MRTG\WWW=20
=20
Andy=20
- -----Original Message-----=20
From: tony bourke [ mailto:tony at vegan.net]=20
Sent: Wednesday, May 22, 2002 3:52 PM=20
To: MRTG at list.ee.ethz.ch=20
Subject: [mrtg] Re: Target does not make sense=20
=20
Hello,=20
Typically I get that error when I don't realize that the Target line=20
has=20
two line breaks in it, i.e. not a contiguous line. This is usually=20
the=20
result of line wrapping in various editors.=20
Tony=20
On Wed, 22 May 2002,=20
it was written:=20
> Content-Type: text/plain;=20
> charset=3D"iso-8859-1"=20
> Content-Transfer-Encoding: quoted-printable=20
>=20
> I am a successful user of MRTG and RRD Tool. Using the Generic=20
CFGMaker I have no problem. Recently I have tried to introduce new=20
targets into my config scripts but they don't work. I keep getting=20
the=20
same message: "Error in line X=20
target[x]:x.x.x.x.x.x&x.x.x.x.x.x:community at IP in XXX.cfg does not=20
make=20
sense". This happens with every target that I try to monitor. What am=20
I=20
doing wrong?=20
> =3D20=20
>=20
> =3D20=20
> =3D20=20
> =3D20=20
>=20
> =3D20=20
>=20
>=20
>=20
> -- Attached file removed by Listar and put at URL below --=20
> -- Type: image/gif=20
> -- Desc: image001.gif=20
> -- Size: 14k (14616 bytes)=20
> -- URL : http://www.ee.ethz.ch/~slist/pantomime/09-image001.gif=20
>=20
>=20
> -- Attached file removed by Listar and put at URL below --=20
> -- Type: image/gif=20
> -- Desc: image002.gif=20
> -- Size: 50k (51251 bytes)=20
> -- URL : http://www.ee.ethz.ch/~slist/pantomime/07-image002.gif=20
>=20
>=20
> --=20
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=3Dunsubscribe=20
> Archive http://www.ee.ethz.ch/~slist/mrtg=20
> FAQ http://faq.mrtg.org Homepage http://www.mrtg.org=20
> WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi=20
>=20
- --=20
- -------------- -- ---- ---- --- - - - - - -- - - - - - -=20
Tony Bourke tony at vegan.net=20
=20
- --=20
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=3Dunsubscribe=20
Archive http://www.ee.ethz.ch/~slist/mrtg=20
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org=20
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi=20
- --=20
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=3Dunsubscribe=20
Archive http://www.ee.ethz.ch/~slist/mrtg=20
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org=20
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi=20
=20
Confidentiality Notice: This e-mail message, including any=20
attachments, is=20
for the sole use of the intended recipient(s) and may contain=20
confidential=20
and privileged information. Any unauthorized review, use, disclosure=20
or=20
distribution is prohibited. If you are not the intended recipient,=20
please=20
contact the sender by reply e-mail and destroy all copies of the=20
original=20
message.=20
- --=20
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=3Dunsubscribe=20
Archive http://www.ee.ethz.ch/~slist/mrtg=20
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org=20
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi=20
-----BEGIN PGP SIGNATURE-----=20
Version: PGP 7.0.1=20
iQA/AwUBPOwPkFGJUk/xhG8mEQL9vwCgvkap7Hf5LbMZOx86IQuomQLGg2gAoL/a=20
BgcUz98ySivSuwvi1tXCzd/H=20
=3DIlGi=20
-----END PGP SIGNATURE-----=20
-- Attached file removed by Listar and put at URL below --
-- Type: image/gif
-- Desc: image001.gif
-- Size: 14k (14616 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/10-image001.gif
-- Attached file removed by Listar and put at URL below --
-- Type: image/gif
-- Desc: image002.gif
-- Size: 50k (51251 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/08-image002.gif
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list