[mrtg] Re: Using mrtg with cisco and subinterfaces?

[Andreas Nolte]

Hi,

do you checked that the ifIndex for this subinterface is correct ? The best is to do a snmpwalk on the interfaces table of the MIB-2 of this particular router, to get all of the available interfaces and their index.


Regards

Andreas


On Thu, 23 May 2002 10:43:14
magnus.hammarwall at spray.se wrote:

> 
> I am setting up an mrtg server to monitor a number of different
> subinterfaces on a cisco router. I am able to get the main
> interfaces ust fine but when it sees the sub interfaces it get these
> errors and it wont' display them. Below is the error message.
> 
> ### Interface 10 >> Descr: 'ATM1/0/0.0-atm subif' | Name: '' | Ip: '' | Eth: '' ###
> ### The following interface is commented out because:
> ### * got 'Received SNMP response with error code
> ###       error status: noSuchName
> ###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.10)
> ###     SNMPv1_Session (remote host: "GBG2-CORE.swip.net" [130.244.0.21].161)
> ###                       community: "public"
> ###                      request ID: -1925919556
> ###                     PDU bufsize: 8000 bytes
> ###                         timeout: 2s
> ###                         retries: 5
> ###                         backoff: 1)' from interface when trying to query
> #
> # Target[GBG2-CORE.swip.net_ATM1_0_0.0-atm_subif]: \ATM1/0/0.0-atm\ subif:public at GBG2-CORE.swip.net:
> # SetEnv[GBG2-CORE.swip.net_ATM1_0_0.0-atm_subif]: MRTG_INT_IP="" MRTG_INT_DESCR="ATM1/0/0.0-atm subif"
> # MaxBytes[GBG2-CORE.swip.net_ATM1_0_0.0-atm_subif]: 18720000
> # Title[GBG2-CORE.swip.net_ATM1_0_0.0-atm_subif]: Traffic Analysis for ATM1/0/0.0-atm subif -- GBG2-CORE.swip.net
> # PageTop[GBG2-CORE.swip.net_ATM1_0_0.0-atm_subif]: <H1>Traffic Analysis for ATM1/0/0.0-atm subif -- GBG2-CORE.swip.net</H1>
> #  <TABLE>
> #    <TR><TD>System:</TD>     <TD>GBG2-CORE.swip.net in </TD></TR>
> #    <TR><TD>Maintainer:</TD> <TD></TD></TR>
> #    <TR><TD>Description:</TD><TD>ATM1/0/0.0-atm subif link to GBG-LS1010-1 port ATM0/0/1 </TD></TR>
> #    <TR><TD>ifType:</TD>     <TD>ATM Sub Interface (134)</TD></TR>
> #    <TR><TD>ifName:</TD>     <TD></TD></TR>
> #    <TR><TD>Max Speed:</TD>  <TD>149.8 Mbits/s</TD></TR>
> #  </TABLE>
> 
> If anybody has any clues
> as to what might be going on here please let me know. It seems that this
> is only happenening on the subinterfaces of the router itself.
> 
> 
> 
> 
> _________________________________________s_p_r_a_y_
> Här börjar Internet!
> Skaffa gratis e-mail och gratis Internet på http://www.spray.se
> 
> Premiär för Spray Smart Mobil - med Sveriges billigaste SMS! http://www.spray.se/smart/kampanj
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 


-- 
******************

Andreas Nolte
Email: anolte at ccietac.de

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi