[mrtg] Re: Tracking FECN's with MRTG

[Robert_Mersberger at BeverlyCorp.com]

I'm sorry but you need two OID's the second one would be 5.5.80 (this is
becn's)

-----Original Message-----
From: Bush, David A [mailto:BushDA at corning.com]
Sent: Thursday, May 23, 2002 2:14 PM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: Tracking FECN's with MRTG



Thanks Robert - I've added this line to my /etc/mrtg/mrtg.cfg:

Target[sg00wr1s002fecns]:
.1.3.6.1.2.1.10.32.2.1.4.5.80:<mystring>@sg00wr1.corning.com
MaxBytes[sg00wr1s002fecns]: 1250000
Title[sg00wr1s002fecns]: Frame-Relay Traffic Analysis
PageTop[sg00wr1s002fecns]: <H1>FECN count for SG00WR1 S0/0.2 - PVC to SNAP
S9/0.11</H1>

and MRTG is barking at me with this:

[root at dyn02579401 bushda]# mrtg /etc/mrtg/mrtg.cfg
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.137)
SNMPv1_Session (remote host: "sg00wr1.corning.com" [10.255.174.1].161)
                  community: "NascarisNumber1"
                 request ID: 176924152
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 450
SNMPGET Problem for ifInOctets.137 ifOutOctets.137 sysUptime sysName on
NascarisNumber1 at sg00wr1.corning.com
 at /usr/bin/mrtg line 1491
WARNING: Expected a number but got ''
WARNING: Expected a number but got ''

I found the 1.3.6.1.2.1.10.32.2.1.4.5.80 by walking the router with GetIF.
(Great tip guys!)

Any ideas?? What am I doing wrong?

Thanks guys, 
- Dave

Dave Bush
Network Analyst
Corning, Inc.
(607)974-0103
bushda at corning.com

> ----------
> From: 	Mersberger, Robert[SMTP:Robert_Mersberger at BeverlyCorp.com]
> Sent: 	Thursday, May 23, 2002 9:24 AM
> To: 	'Bush, David A'; 'mrtg at list.ee.ethz.ch'
> Subject: 	RE: [mrtg] Tracking FECN's with MRTG
> 
> This is the target I use for a 3620:
> Target[getdlci2]:
>
.1.3.6.1.2.1.10.32.2.1.4.2.101&.1.3.6.1.2.1.10.32.2.1.5.2.101:secret at 172.16.
> 101.88
> The last 3 fields are frCircuitReceivedFECNs.interface.dlci
> You can try this.  The only problem I have is that I only track change by
> watching the chart increase. I would like to only see the differences on
the
> chart.
> 
> Hope this works for you.
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi