[mrtg] Re: 4 interfaces on the same graph?

[Zeeshan Ahmed]

Hello i also wanted the same but when i tried this with my MRTG
but i amnot getting any thing like what i want cananyone hel ome with this?

Following is the cfg file i am using for this
############################################################################
####

Target[203.81.192.1_4]:5:public at xxx.xxx.xxx.xxx: + 4:public at xxx.xxx.xxx.xxx:
+ 6:publi
c at xxx.xxx.xxx.xxx: + 7:public at xxx.xxx.xxx.xxx: +
SetEnv[xxx.xxx.xxx.xxx_4]: MRTG_INT_IP="202.125.139.18"
MRTG_INT_DESCR="Serial2/0"
MaxBytes[xxx.xxx.xxx.xxx_4]: 187500
Title[xxx.xxx.xxx.xxx_4]: Traffic Analysis for 4 -- lhr-bb-router
PageTop[xxx.xxx.xxx.xxx_4]: <H1>Traffic Analysis for 4 -- lhr-bb-router</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>lhr-bb-router in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial2/0 1.5MB </TD></TR>
   <TR><TD>ifType:</TD>     <TD>propPointToPointSerial (22)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se2/0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1500.0 kbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>xxx.xxx.xxx.xxx()</TD></TR>
 </TABLE>

----- Original Message -----
From: "Martijn Koopsen" <MKoopsen at Energis.nl>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, May 24, 2002 7:47 AM
Subject: [mrtg] Re: 4 interfaces on the same graph?


>
>
> In the config-file you can put the following statement
>
> Target[target]: OID:community at target1 + OID:community at target2 +
> OID:community at target3 + OID:community at target4
>
> Remember to put spaces between the target and the +
>
> I am adding 96 OIDS in one line
>
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> Martijn Koopsen
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>
> -----Original Message-----
> From: Gabriel Lorenzo [mailto:needle at arrakis.es]
> Sent: vrijdag 24 mei 2002 15:59
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] 4 interfaces on the same graph?
>
> How can I represent 4 Interfaces on the same graph . Do I have to us
> RRDTool? .
> Someone can Show me an example?
>
>     Thanks, Gabriel.
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
>
#***************************************************************************
> #
> # This e-mail is from Energis NV, K.P. van der Mandelelaan 130-144, 3062
MB,
> # Rotterdam, Netherlands.
> #
> # This e-mail is confidential to the addressee and may be privileged. The
> # views expressed are personal and do not necessarily reflect those of
> # Energis. If you are not the intended recipient please notify the sender
> # immediately by calling the senders telephone number as printed in the
> # signature of this message and do not disclose to another person or use,
> # copy or forward all or any of it in any form.
> #
>
#***************************************************************************
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi