[mrtg] Re: AS5300 ISDN PRI traffic

[Simon Watts]

Without looking/knowing exactly what data you are trying to collect here,
or what your actual problem is, I'd say that the MaxBytes value is too
low.

Doing a quick snmpget for those values on some of our AS5X00's, I'm seeing
values returned like 81, 169, etc.  Try raising your MaxBytes to a bigger
values (like 500, or even 1000) and see if you start seeing results then.

Simon

 On Thu, 30 May 2002, Stephen wrote:

>   Hello There,
>
>   I have few Cisco AS5300 for VoIP traffic. I have been trying to use mrtg
> to monitor E1 channels traffic utilization but somehow it doesn't seems to
> be working.
>   IOS version is (C5300-IS-M), Version 12.2(5). MRTG 2.9.17
>   I would like to monitor the workload for each trunk line(30 channels).
>
>   Config is as below;
>   PageTop[AS5300]: <H1>cpmISDNBChanInUse4Analog & cpmISDNBChanInUse </H1>
>   Target[AS5300]:
> 1.3.6.1.4.1.9.10.19.1.1.2.0&1.3.6.1.4.1.9.10.19.1.1.3.0:readonly at 192.168.0.2
> 54
>   Directory[AS5300]: AS5300
>   WithPeak[AS5300]: wmy
>   Unscaled[AS5300]: dwmy
>   Options[AS5300]: growright, nopercent, integer,absolute,gauge
>   MaxBytes[AS5300]: 30
>   Title[AS5300]: My AS5300 : Async 1-30
>   Ylegend[AS5300]: Active Modems
>   ShortLegend[AS5300]: Modems
>   Legend1[AS5300]: Current Active Modems
>   Legend2[AS5300]: Current Active ISDN
>   Legend3[AS5300]: 5 minute Average Active Modems
>   Legend4[AS5300]: 5 Minute Average Active ISDN
>   LegendI[AS5300]:  Modems:
>   LegendO[AS5300]:  ISDN:
>
>   It there any necessary SNMP config need to put in on AS5300? CPU load and
> FE0 traffic is working fine.....
>   Can someone enlighten me
>
>
>   Thanks in advance.
>   stephen
>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>


----------------------------------------------------------------
Simon Watts            Assoc. Network Architect   180 Burnley St
swatts at connect.com.au  Ph  +61 3 8414 3126              Richmond
Connect Internet Sol.  Fax +61 3 8414 3115       Vic, Aust, 3121
----------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi