[mrtg] Re: MRTG "no response received" error on Bay Router

[Sawyer, David]

I use a Windows host for MRTG and the GUI GetIf to do my SNMP walking, so I
don't know the correct syntax to SNMPWALK on your box.
I'm sure someone on the list will be able to help you.

Make sure UDP161 is allowed in both directions through the firewall.

Thanks
David Sawyer

Email: david.sawyer at mckesson.co.uk

 www.geocities.com/mrtg_daemon
   MRTG/RRDTool daemon for Windows9x/ME/2k
   MRTG GUI ConfigMaker for Windows9x/ME/2k


-----Original Message-----
From: Roncevich, Michael [mailto:RoncevichM at logica.com]
Sent: 30 May 2002 16:38
To: Sawyer, David
Subject: RE: [mrtg] MRTG "no response received" error on Bay Router


David:

Yes, I double-checked the community name and case and
it's correct.

Yes, there is a firewall between the server and the router.
It actually takes 13 hops via traceroute to get to the destination,
though it does get there and in a resonable amount of time.

I'll have our network admin check the UDP161 issue.  Can
I bother you to give me additional details on "SNMP walking"?

Thanks!

-M-


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi