[mrtg] Re: help reading MIB with SnmpWalk

[Makai József]

Hi Eric,

Try:

cpmCPUTotal5min		1.3.6.1.4.1.9.9.109.1.1.1.1.5.9

I could not use

cpmCPUTotal5minRev		1.3.6.1.4.1.9.9.109.1.1.1.1.8.X

An snmpwalk for  1.3.6.1.4.1.9.9.109.1.1 resulted for me only:

.iso.org.dod.internet.private.enterprises.9.9.109.1.1.1.1.2.9    -->
"cpmCPUTotalPhysicalIndex"
.iso.org.dod.internet.private.enterprises.9.9.109.1.1.1.1.3.9    -->
"cpmCPUTotal5sec"
.iso.org.dod.internet.private.enterprises.9.9.109.1.1.1.1.4.9    -->
"cpmCPUTotal1min"
.iso.org.dod.internet.private.enterprises.9.9.109.1.1.1.1.5.9    -->
"cpmCPUTotal5min"

(cat 4006, COS 6.3)

You can download the OIDs from CISCO, not only the MIBs.

Jozsef


> I got a mib from Cisco called CISCO-PROCESS-MIB.my.  I placed 
> that file in
> my mibs directory and run the following:
> 
> snmpwalk -m CISCO-PROCESS-MIB.my a.b.c.d community_str
> I also tried:
> snmpwalk -m ..\path_to\CISCO-PROCESS-MIB.my a.b.c.d community_str
> and
> snmpwalk -M ..\path_to\mibs_dir -m 
> ..\path_to\CISCO-PROCESS-MIB.my a.b.c.d
> community_str
> and
> snmpwalk -M ..\path_to\mibs_dir -m CISCO-PROCESS-MIB.my a.b.c.d
> community_str
> 
> I also tried with some existing mib files, and with all cases got:
> 
> Cannot find module (CISCO-PROCESS-MIB.my): At line 1 in (none)
> 
> Specifically I am looking for cpmCPUTotal5minRev on my cat 
> 4006 so I can get
> CPU utilization.  But I can't seem to get the mib to "work" 
> to just walk it.
> I really just want the OID anyway.  Can anyone offer a clue?
> 
> TIA,
> Eric

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi