[mrtg] Newbie

[From Web Mail]

                         3
         Public         Public         Private
        Address         Address        Address
        203.172.X.X   203.172.X.X -   192.168.200.200 

   _____          ____   |       ____  192.168.200.190
   |    |        |    |__|      |    |  eth1  |- --|
---|    |--------|    |---------|    |--------|    |
   |____|        |____|         |____|        |____|
                                   
 DSL MODEM       3COM            Coyote         Linux
               Office Connect    Linux           Box
                 Switch         Gateway        Server
 

hi 

 Good Day, my interest in using MRTG started when i
got fluctuating bandwidth  problem with of our dsl
connection. And i had read that one of the many uses 
of mrtg is to monitor a bandwidth. But mostly in the
archieve that i have read use mrtg to monitor router
bandwidth router.

Base in the figure above i want to monitor the
bandwidth connection on eth1. so in install mrtg on
the (linux server box)pc.

My question is is this posible to run a mrtg and be
able to get the bandwith connection of the internet?

this is the error a get..

[root at localhost /root]# ./create-mrtg 10001
192.168.200.190
--base: Get Device Info on public at 192.168.200.190:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.200.190"
[192.168.200.190].161)
                  community: "public"
                 request ID: 1939737038
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 458
SNMPGET Problem for sysDescr sysContact sysName
sysLocation sysObjectID on publi
c at 192.168.200.190:
 at /usr/bin/cfgmaker line 680
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because
public at 192.168.200.190: does not seem t
o support it
--snpo: Skipping ifDescr scanning because
public at 192.168.200.190: does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because
public at 192.168.200.190: does not seem to support it
--snpo: Skipping ifType scanning because
public at 192.168.200.190: does not seem to support it
--snpo: Skipping ifPhysAddress scanning because
public at 192.168.200.190: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.200.190"
[192.168.200.190].161)
                  community: "public"
                 request ID: 1939737044
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 571
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on
public at 192.168.200.190:
 at /usr/bin/cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.200.190"
[192.168.200.190].161)
                  community: "public"
                 request ID: 1939737045
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 571
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on
public at 192.168.200.190:
 at /usr/bin/cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.200.190"
[192.168.200.190].161)
                  community: "public"
                 request ID: 1939737046
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 571
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on
public at 192.168.200.190:
 at /usr/bin/cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.200.190"
[192.168.200.190].161)
                  community: "public"
                 request ID: 1939737047
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 571
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on
public at 192.168.200.190:
 at /usr/bin/cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.200.190"
[192.168.200.190].161)
                  community: "public"
                 request ID: 1939737048
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/bin/../lib/mrtg2/SNMP_util.pm line 571
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on
public at 192.168.200.190:
 at /usr/bin/cfgmaker line 107
--base: Writing /etc/mrtg/10001.cfg
[root at localhost /root]#

your help guys would be great

thanks


__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi