[mrtg] Re: Graphing Problem
Brander, Eric
Eric.Brander at ACS-INC.com
Fri Apr 4 23:32:52 MEST 2003
The options need to be above the targets as MRTG reads the cfg file from top
to bottom.
Eric Brander
ACS
Texas CHIP Account
Sr. Communications Engineer - Information Systems Department
512.336.3331
Eric dot Brander at acs-inc dot com
-----Original Message-----
From: Jeff_Nagel at wlc.edu [mailto:Jeff_Nagel at wlc.edu]
Sent: Friday, April 04, 2003 3:24 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Graphing Problem
I have re-run the cfg which I posted below, and the graphs are still
growing to the left. I am using ActivePerl 5.6. In the past I have used
FreeBSD and had no problems with my graphs. Any other suggestion.
Thanks.
# Created by
# cfgmaker public at 172.16.11.72 --global 'WorkDir: c:\www\mrtg\4100_tech'
--global 'Options[_]: growright, bits' --output c:
\www\mrtg\cfg\4100_tech.cfg
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
######################################################################
# System: NPI31BA7E
# Description: HP ETHERNET MULTI-ENVIRONMENT,ROM
L.20.07,JETDIRECT,JD84,EEPROM L.20.24
# Contact:
# Location:
######################################################################
### Interface 1 >> Descr: '' | Name: '' | Ip: '172.16.11.72' | Eth:
'00-30-c1-31-ba-7e' ###
Target[172.16.11.72_1]: 1:public at 172.16.11.72:
SetEnv[172.16.11.72_1]: MRTG_INT_IP="172.16.11.72" MRTG_INT_DESCR=""
MaxBytes[172.16.11.72_1]: 1250000
Title[172.16.11.72_1]: Traffic Analysis for 1 -- NPI31BA7E
PageTop[172.16.11.72_1]: <H1>Traffic Analysis for 1 -- NPI31BA7E</H1>
<TABLE>
<TR><TD>System:</TD> <TD>NPI31BA7E in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD> </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>172.16.11.72 ()</TD></TR>
</TABLE>
### Interface 2 >> Descr: '' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is a Software Loopback interface
### * has a speed of 0 which makes no sense
#
# Target[172.16.11.72_2]: 2:public at 172.16.11.72:
# SetEnv[172.16.11.72_2]: MRTG_INT_IP="" MRTG_INT_DESCR=""
# MaxBytes[172.16.11.72_2]: 0
# Title[172.16.11.72_2]: Traffic Analysis for 2 -- NPI31BA7E
# PageTop[172.16.11.72_2]: <H1>Traffic Analysis for 2 -- NPI31BA7E</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>NPI31BA7E in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD> </TD></TR>
# <TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# </TABLE>
WorkDir: c:\www\mrtg\4100_tech
Options[_]: growright, bits
Jeff Nagel, MCP
Network Support Specialist
Wisconsin Lutheran College
(414)443-8798
|---------+---------------------------->
| | "emily, amanda" |
| | <aemily at colsd.org|
| | > |
| | Sent by: |
| | mrtg-bounce at list.|
| | ee.ethz.ch |
| | |
| | |
| | 04/04/2003 03:06 |
| | PM |
| | |
|---------+---------------------------->
>---------------------------------------------------------------------------
--------------------------------------------------|
|
|
| To: <mrtg at list.ee.ethz.ch>
|
| cc:
|
| Subject: [mrtg] Re: Graphing Problem
|
>---------------------------------------------------------------------------
--------------------------------------------------|
You misspelled options. It should be options[_]: growright, bits
Amanda Emily
Colville School District #115
Colville, WA USA
-----Original Message-----
From: Jeff_Nagel at wlc.edu [mailto:Jeff_Nagel at wlc.edu]
Sent: Friday, April 04, 2003 1:00 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Graphing Problem
I just installed mrtg 2.9.27 on a Windows 2000 machine and it went great
but for some reason my graphs are growing to the left showing bytes per
second. I have added the Option[_] growright, bits to the cfg file but is
still growing to the left. Any suggestions.
Thanks.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list