[mrtg] Re: Using Dell Server MIBS

[Michael Markstaller]

Hi,
as I couldn't find the 10892.mib on and the one you get from extracted from Dell OMSA after downloading many MB's is quite broken, I've attached a slightly patched 10892.mib that works for me (RH 7.1/UCD-snmp version 4.2.5). (The listserver will strip it off and place it for download!)

The descriptions of the what table-value reflects which probe should be evaluated by doing an snmpwalk on temperatureProbeTable as it differs for each server model I have..

Michael

-----Original Message-----
From: David Mohorn [mailto:dm4714 at cox.net]
Sent: Wednesday, April 09, 2003 4:02 AM
To: Manny Ortega; 'Morrow, Dave'; MRTG (E-mail)
Subject: [mrtg] Re: Using Dell Server MIBS


Hi.  We have some PowerEdge Dells at work.  Can you post your .cfg file?
Also, do you know where I can get the MIBS for Dell?

...david
http://micro-mess.com/
http://micro-mess.com/forum/


 -----Original Message-----
From: 	mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]  On
Behalf Of Manny Ortega
Sent:	Tuesday, April 08, 2003 2:17 PM
To:	'Morrow, Dave'; MRTG (E-mail)
Subject:	[mrtg] Re: Using Dell Server MIBS

This is what I check:
Ambient temperature: (Dell PowerEdge 3650)
ESM Front I/O Temp: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.1
BP Bottom Temp: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.5
Cpu temp: (Dell PowerEdge 3650)
CPU 1 temp: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2
CPU 2 temp: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.3
ambient and HD temp: (Dell PowerEdge 1300)
Ambient temperature: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2
Hard Drive temperature: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.1
Cpu temp: (Dell PowerEdge 1300)
CPU 1 temperature: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.3
CPU 2 temperature: 1.3.6.1.4.1.674.10892.1.700.20.1.6.1.4

-MannyO


-----Original Message-----
From: Morrow, Dave [mailto:Dave.Morrow at compass-canada.com]
Sent: Tuesday, April 08, 2003 12:16 PM
To: MRTG (E-mail)
Subject: [mrtg] Using Dell Server MIBS


Anyone out there done any monitoring of Dell PowerEdge Servers?  I'm just
looking to avoid re-inventing the wheel.....


David Morrow
Senior Network Administrator
Compass Group Canada
Tel: (519) 679-2661 x330
Fax:(519) 679-3268
mailto:dave.morrow at compass-canada.com
http://www.compass-canada.com

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Desc: 10892.mib
-- Size: 487k (499155 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/10892.mib


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi