[mrtg] Can MRTG make the switch reset ?

[TS/9A (Metha T. 7359)]

Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
                        Hello forum !

                        This is my strange story, I received the "SNMP
Authentication Failure" trap from the Linux machine running MRTG in my
AVAYA Cajun P882's event log. After that, I advice the MRTG's
administrator to correct the SNMP community string on the MRTG. But I
didn't exactly know how he change or what he change, suddenly after he
make change to MRTG the unexpected phenomenon occurred, my core switch
automatically reset. The following is the interesting message on HPOV at
the same time the core switch reset:=20

=20

- Critical Thu Apr 17 14:32:45  p882-north            Possible device
reconfiguration.  Interface to IfIndex have been remapped.  You      =20

may need to reconfigure any data collection on p882-north.  The new
interface mappings are:\n'MOC1-T'(old=3D11, new=3D14), =
'MOC1-M'(old=3D12,
new=3D15), 'MOC1-D'(old=3D13, new=3D16), 'MOC2'(old=3D14, new=3D17),
'P334T-ROC1-T'(old=3D15, new=3D18), 'P334T-ROC1-M'(old=3D16, new=3D19),
'ROC2-T'(old=3D17, new=3D20), 'ROC2-P334T-D'(old=3D18, new=3D21), 'Port
4.1'(old=3D21, new=3D24), 'Port 4.2'(old=3D22, new=3D25), 'Port =
4.3'(old=3D23,
new=3D26), 'Port 4.4'(old=3D24, new=3D27), 'Port 4.5'(old=3D25, =
new=3D28), 'Port
4.6'(old=3D26, new=3D29), 'Port 4.7'(old=3D27, new=3D30), =
'BACKBONE_4_8'(old=3D28,
new=3D31), 'WH1-T_5.1'(old=3D31, new=3D34), 'WH1-D_5.2'(old=3D32, =
new=3D35),
'WH2_5.3'(old=3D33, new=3D36), 'CCB-D_5.4'(old=3D34, new=3D37),
'LAB_5.5'(old=3D35, new=3D38), 'ROC2-P334T-M'(old=3D36, new=3D39),
'CCB-T_5.7'(old=3D37, new=3D40), 'BACKBONE_5_8'(old=3D38, new=3D41),
'WH1-T_6.1'(old=3D41, new=3D44), 'WH1-D_6.2'(old=3D42, new=3D45),
'WH2_6.3'(old=3D43, new=3D46), 'CCB-D_6.4'(old=3D44, new=3D47)

=20

I also attached this e-mail with configuration file of the MRTG. Because
of I've no good knowledge enough on MRTG, please the forum to help me to
confirm either MRTG did the switch reset event or MRTG did not. Any
advice, tips, feedback, etc., would be greatly appreciated.

=20

              Regards

              MethaT.

=20

=20

=20

=20

=20

=20

=20




-- Attached file removed by Ecartis and put at URL below --
-- Type: application/x-zip-compressed
-- Desc: MRTG_Config.zip
-- Size: 22k (23074 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/MRTG_Config.zip


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi