[mrtg] Bug or not Bug ?

[Nicolas Viers - SCI]

                 Hello,
here is a part of my mrtg.cfg. I try to monitor vlan on a catalyst 6509.

Target[c6509_Vl100]: 
1.3.6.1.4.1.9.9.97.1.4.2.1.7.1011#Vl100&1.3.6.1.4.1.9.9.97.1.4.2.1.9.1011#Vl100:public at c650
9:::::2
SetEnv[c6509_Vl100]: MRTG_INT_IP="1.2.3.254" MRTG_INT_DESCR="Vlan100"
MaxBytes[c6509_Vl100]: 125000000
Title[c6509_Vl100]: Traffic Analysis for Vl100 -- C6509
PageTop[c6509_Vl100]: <H1>Traffic Analysis for Vl100 -- C6509</H1>

Target[c6509_Vl120]: 
1.3.6.1.4.1.9.9.97.1.4.2.1.7.1011#Vl120&1.3.6.1.4.1.9.9.97.1.4.2.1.9.1011#Vl120:public at c650
9:::::2
SetEnv[c6509_Vl120]: MRTG_INT_IP="1.2.3.254" MRTG_INT_DESCR="Vlan120"
MaxBytes[c6509_Vl120]: 125000000
Title[c6509_Vl120]: Traffic Analysis for Vl120 -- C6509
PageTop[c6509_Vl120]: <H1>Traffic Analysis for Vl120 -- C6509</H1>

For the vlan 100 no pb the mrtg graph are generated, but fot vlan 120 and 
other greater
than vlan 100 there is the error message below:
ERROR: Target[c6509_vl120][_IN_] ' $$target[1]{$mode} ' did not eval into 
defined data
ERROR: Target[c6509_vl120][_OUT_] ' $$target[1]{$mode} ' did not eval into 
defined data
WARNING: Skipping Update of c6509_vl120, inlast is not defined
WARNING: Skipping Update of c6509_vl120, outlast is not defined

Any idea ?

Thank you


____________________________________________________________

Nicolas Viers               |  Service Commun Informatique
Mél: viers at unilim.fr        |  123, avenue Albert Thomas
                             |     87060 Limoges cedex
Tel: 05-55-45-77-09         |  Fax: 05-55-45-75-95
                   http://www.unilim.fr/sci
____________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi