[mrtg] Re: Cisco 7206 - 64 bit counter works on one interface, but not anoth er?

[Barber, Erik A.]

You should have 5 colons, but to use snmp v2, the number after the five colons should be "2".

-----Original Message-----
From: brandon.baker [mailto:brandon.baker at inforonics.com]
Sent: Monday, August 04, 2003 11:08 AM
To: 'Peter Glanville'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Cisco 7206 - 64 bit counter works on one interface,
but not anoth er?


Are you saying that I should only have four (:) colons in the non-working
interface?

The reference says five colons and the config that is working is using five
colons as well.

Brandon

-----Original Message-----
From: Peter Glanville [mailto:peter_glanville at cuk.canon.co.uk]
Sent: Monday, August 04, 2003 12:02 PM
To: brandon.baker; mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Cisco 7206 - 64 bit counter works on one interface,
but not anoth er?




> Can you think of any reason why 64 bit counters will work great on one
> router interface, but not another?
<snip>
> This one still wraps:
> Target[non-working_TOTAL-AGGREGATE]: -4:public at 10.16.32.21:::::4 +
> -4:public at 10.16.32.22:::::4 + 4:public at 10.16.32.21:::::4 +
> 4:public at 10.16.32.22:::::4

::::4
Four???!!!!
More care with that search&replace in future

Peter




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi