[mrtg] Re: PIX 515 and outlast and inlast not defined - MRTG 2.9.29

Brad Covell bcovell at sagestone.com
Fri Aug 15 16:54:16 MEST 2003


I'm not sure why the target is Target[192.168.115.254_1][_IN_]
'1:@public at 192.168.115.254

I think getting rid of [_IN_] '1 might help. I would try renaming your
targets

Here is the target I suggest using.

#outside interface
Target[192.168.115.254_out]: 1: public at 192.168.115.254:


-----Original Message-----
From: Collin McClendon [mailto:CMcClendon at synergyonefcu.org] 
Sent: Friday, August 15, 2003 10:44 AM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] PIX 515 and outlast and inlast not defined - MRTG 2.9.29

Hello all, I have read the manual, searched all of this list and Usenet,
and
I can't quite understand this error. Not knowing Perl yet I was hoping
that
this was something I could get help with. I did see a prior post with
this
error saying that older versions of mrtg did work, however, there was no
response to why it won't work with 2.9.29 which I am using. I have tried
2.10-pre9 as well with the same results. I'm trying to poll our PIX 515
and
I do succeed in getting cfgmaker to create a config file. I can attach
or
send it if anyone needs it. Thanks for any help! When I run mrtg against
the
cfg I get this error for each of the three interfaces:
ERROR: Target[192.168.115.254_1][_IN_] '1:@public at 192.168.115.254:'
(warn):
Array found where operator expected at (eval 4) line 1, at end of line
ERROR: Target[192.168.115.254_1][_OUT_] '1:@public at 192.168.115.254:'
(warn):
 Array found where operator expected at (eval 5) line 1, at end of line
WARNING: Skipping Update of 192.168.115.254_1, inlast is not defined
WARNING: Skipping Update of 192.168.115.254_1, outlast is not defined
ERROR: Target[192.168.115.254_2][_IN_] '2:@public at 192.168.115.254:'
(warn):
Array found where operator expected at (eval 6) line 1, at end of line
ERROR: Target[192.168.115.254_2][_OUT_] '2:@public at 192.168.115.254:'
(warn):
 Array found where operator expected at (eval 7) line 1, at end of line
WARNING: Skipping Update of 192.168.115.254_2, inlast is not defined
WARNING: Skipping Update of 192.168.115.254_2, outlast is not defined
ERROR: Target[192.168.115.254_3][_IN_] '3:@public at 192.168.115.254:'
(warn):
Array found where operator expected at (eval 8) line 1, at end of line
ERROR: Target[192.168.115.254_3][_OUT_] '3:@public at 192.168.115.254:'
(warn):
 Array found where operator expected at (eval 9) line 1, at end of line
WARNING: Skipping Update of 192.168.115.254_3, inlast is not defined
WARNING: Skipping Update of 192.168.115.254_3, outlast is not defined



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list