[mrtg] Re: w2K server monitoring

[Jason Humes]

Hello
Yes, I've installed the SNMP4W2K package...and I can use getif to see the
basic SNMP info, Location, contact, etc. but the MRTG CPU graph returns the
noSuchName error.  This is a W2K server with a single processor.  Where
should the snmp settings be configured for the server?  Under the SNMP
service correct?  Thanks very much.  Maybe someone could past a copy of a
similar config file.  Thanks.

-----Original Message-----
From: junk at leaveittobeaver.net [mailto:junk at leaveittobeaver.net] 
Sent: Wednesday, August 27, 2003 3:59 PM
To: 'MRTG Mailing List'
Subject: [mrtg] Re: w2K server monitoring

Hello Jason,

The default SNMP support within Windows 2000 may not support these
values.  Have you installed the package mentioned below "SNMP4W2k"?
That is what you need.  After you install that, you should be able to
see the values.j

-- 
Best regards,
 John

Wednesday, August 27, 2003, 2:30:20 PM, you wrote:

JH> Hello   
JH> When I use the somix w2k cpu template, and change all of the variables
JH> within the cfg file, including the community name, and I've gone into
the
JH> SNMP service on my server and set the community string to match, yet
when I
JH> run this cpu config file I get the noSuchName error.  Please help.

JH> -----Original Message-----
JH> From: Cornwell, Eric J. [mailto:EJCORNWELL at coopertire.com] 
JH> Sent: Wednesday, August 27, 2003 9:17 AM
JH> To: 'Jason Humes'; 'MRTG Mailing List'
JH> Subject: RE: [mrtg] w2K server monitoring

JH> Jason,

JH> There is a great utility that I used to help me monitor my Win2k machine
JH> called SNMP4W2K (http://www.wtcs.org/snmp4tpc/snmp4w2k.htm).  After that
I
JH> just used Getif to walk the device and found the processor oid.  For
mine it
JH> was, 1.3.6.1.2.1.25.3.3.1.2.1.  I don't know if this is available
without
JH> SNMP4W2K, but it might be.
JH> I hope this helps.

JH> Eric

JH> -----Original Message-----
JH> From: Jason Humes [mailto:jhumes at acs.on.ca]
JH> Sent: Wednesday, August 27, 2003 9:10 AM
JH> To: 'MRTG Mailing List'
JH> Subject: [mrtg] w2K server monitoring


JH> Hello
JH> Does anyone know how to get my W2K server setup to allow me to monitor
CPU
JH> usage on it.  I've installed the SNMP network service and set the
community
JH> string and tried using the template from somix but I get errors when I
run
JH> the cfg file.  Please help.  Thanks

 

JH> Jason D. Humes

 

JH> Applied Computer Solutions Inc.

JH> 3020 St. Etienne Blvd.

JH> Windsor, Ontario

JH> Phone: (519) 944-4300 x211

JH> Fax    : (519) 944-4247

JH> Email : jhumes at acs.on.ca <mailto:jhumes at acs.on.ca> 

 

 

JH> **********************************************************************

JH> Confidentiality Notice: 

JH> The information contained in this e-mail and any attachments may be
legally
JH> privileged and confidential. If you are not an intended recipient, you
are
JH> hereby notified that any dissemination, distribution or copying of this
JH> e-mail and any attachments is strictly prohibited. If you received this
JH> e-mail in error, please notify the sender and permanently delete the
e-mail
JH> and any attachments immediately. You should not retain, copy or use this
JH> e-mail or any attachment for any purpose, nor disclose all or any part
of
JH> the contents to any other person. 

JH> Thank you. 

 



JH> --
JH> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
JH> Archive     http://www.ee.ethz.ch/~slist/mrtg
JH> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
JH> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

JH> --
JH> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
JH> Archive     http://www.ee.ethz.ch/~slist/mrtg
JH> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
JH> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi