[mrtg] Re: w2K server monitoring

[junk at leaveittobeaver.net]

Below is the config that works for me.
================================
Target[CPU1]: .1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.1.48&.1.3.6.1.4.1.311.1.1.3.1.1.2.1.3.1.48:public at localhost
RouterUptime[CPU1]: public at localhost
MaxBytes[CPU1]: 100
Title[cpu1]: CPU1
PageTop[CPU1]: <H1>localhost CPU Utilization</H1>
ShortLegend[CPU1]: %
YLegend[CPU1]: CPU Utilization
Legend1[CPU1]: CPU Utilization in % (Load)
Legend2[CPU1]: 
LegendI[CPU1]: &nbsp;Load:
LegendO[CPU1]: 
Options[CPU1]: gauge, integer, nopercent, noo
================================

-- 
Best regards,
 John
 
Wednesday, August 27, 2003, 3:15:03 PM, you wrote:

JH> Hello
JH> Yes, I've installed the SNMP4W2K package...and I can use getif to see the
JH> basic SNMP info, Location, contact, etc. but the MRTG CPU graph returns the
JH> noSuchName error.  This is a W2K server with a single processor.  Where
JH> should the snmp settings be configured for the server?  Under the SNMP
JH> service correct?  Thanks very much.  Maybe someone could past a copy of a
JH> similar config file.  Thanks.

JH> -----Original Message-----
JH> From: junk at leaveittobeaver.net [mailto:junk at leaveittobeaver.net] 
JH> Sent: Wednesday, August 27, 2003 3:59 PM
JH> To: 'MRTG Mailing List'
JH> Subject: [mrtg] Re: w2K server monitoring

JH> Hello Jason,

JH> The default SNMP support within Windows 2000 may not support these
JH> values.  Have you installed the package mentioned below "SNMP4W2k"?
JH> That is what you need.  After you install that, you should be able to
JH> see the values.j

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi