[mrtg] Monitoring on SuperMicro Servers

Tue Dec 16 16:09:56 MET 2003

Using the utility at
ftp://ftp.supermicro.com/utility/Supero_Doctor_II/Linux/, it is easy to get
the SNMP daemon to use the new OIDs.

I have used the SuperODoctor on a SuperServer 5013G-i
(http://www.supermicro.com/PRODUCT/SUPERServer/SuperServer5013G-i.htm) and
it works fine.

If anyone is interested, the following will graph most important stuff:

----------------------supermicro.cfg-----------------------------------

# MRTG Configuration for SuperODoctor on linux
# As this was used on a SuperServer 5013G-i, not all fan connectors were
used,
# therefore fan1 and fan3 are remmed out. They might be used on other
servers,
# or if you have a different case.
# The -12V line won't plot because the numbers are negative. Using RRDTool
# would sort this out, but i'm not clever enough yet.
# These OIDs were found after adding the passthrough as detailled in INSTALL
# and then running "snmpwalk localhost public enterprises.10876" and
comparing
# with the output of sdt.
#
# chris.clemson at softwareag.co.uk

WorkDir: /www/Stats/network

## Output = min speed
#Target[fan1]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.1&1.3.6.1.4.1.10876.2.1.1.1.1.6.1:public at local
host 
#SetEnv[fan1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="fan2"
#Colours[fan1]: GREEN#00eb0c,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
#YLegend[fan1]: RPM
#LegendI[fan1]: Current
#LegendO[fan1]: Min
#ShortLegend[fan1]: RPM
#MaxBytes[fan1]: 5000
#Options[fan1]: gauge

# Output = min speed
Title[fan2]: CPU Fan Blower
Target[fan2]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.2&1.3.6.1.4.1.10876.2.1.1.1.1.6.2:public at local
host 
SetEnv[fan2]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="fan2"
Colours[fan2]: GREEN#00eb0c,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
YLegend[fan2]: RPM
LegendI[fan2]: Current
LegendO[fan2]: Min
ShortLegend[fan2]: RPM
MaxBytes[fan2]: 5000
Options[fan2]: gauge, transparent

## Output = min speed
#Target[fan3]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.3&1.3.6.1.4.1.10876.2.1.1.1.1.6.3:public at local
host 
#SetEnv[fan3]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="fan2"
#Colours[fan3]: GREEN#00eb0c,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
#YLegend[fan3]: RPM
#LegendI[fan3]: Current
#LegendO[fan3]: Min
#ShortLegend[fan3]: RPM
#MaxBytes[fan3]: 5000
#Options[fan3]: gauge

# Temperatures in C, Output = max temp
Target[CPUtemp]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.9&1.3.6.1.4.1.10876.2.1.1.1.1.5.9:public at local
host 
SetEnv[CPUtemp]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="CPUtemp"
Colours[CPUtemp]: GREEN#00eb0c,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
YLegend[CPUtemp]: Temp in DegC
LegendI[CPUtemp]: Current
LegendO[CPUtemp]: Max
ShortLegend[CPUtemp]: DegC
MaxBytes[CPUtemp]: 200
Options[CPUtemp]: gauge, transparent
Title[CPUtemp]: CPU Temperature

# Temperatures in C, Output = max temp
Target[SYStemp]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.10&1.3.6.1.4.1.10876.2.1.1.1.1.5.10:public at loc
alhost 
SetEnv[SYStemp]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="SYStemp"
Colours[SYStemp]: GREEN#00eb0c,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
YLegend[SYStemp]: Temp in DegC
LegendI[SYStemp]: Current
LegendO[SYStemp]: Max
ShortLegend[SYStemp]: DegC
MaxBytes[SYStemp]: 200
Options[SYStemp]: gauge, transparent
Title[SYStemp]: System Temperature

# .1.6.8 = min, .1.4.8 = current, .1.5.8 = max
Target[CPUvolts]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.8&1.3.6.1.4.1.10876.2.1.1.1.1.6.8:public at local
host
SetEnv[CPUvolts]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="CPUvolts"
Colours[CPUvolts]: YELLOW#FFFF00,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
YLegend[CPUvolts]: Voltage
LegendI[CPUvolts]: Current
LegendO[CPUvolts]: Min
ShortLegend[CPUvolts]: V
MaxBytes[CPUvolts]: 2000
Options[CPUvolts]: gauge, transparent
Title[CPUvolts]: CPU Core A Voltage

# .1.6.7 = min, .1.4.7 = current, .1.5.7 = max
Target[volts3]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.7&1.3.6.1.4.1.10876.2.1.1.1.1.6.7:public at local
host
SetEnv[volts3]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="volts3"
Colours[volts3]: YELLOW#FFFF00,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
YLegend[volts3]: Voltage
LegendI[volts3]: Current
LegendO[volts3]: Min
ShortLegend[volts3]: V
MaxBytes[volts3]: 3400
Options[volts3]: gauge, transparent
Title[volts3]: CPU Core A Voltage

# .1.6.6 = min, .1.4.6 = current, .1.5.6 = max
Target[volts5]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.6&1.3.6.1.4.1.10876.2.1.1.1.1.6.6:public at local
host
SetEnv[volts5]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="volts5"
Colours[volts5]: YELLOW#FFFF00,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
YLegend[volts5]: Voltage
LegendI[volts5]: Current
LegendO[volts5]: Min
ShortLegend[volts5]: V
MaxBytes[volts5]: 6000
Options[volts5]: gauge, transparent
Title[volts5]: +5V Voltage

## .1.6.5 = min, .1.4.5 = current, .1.5.5 = max
#Target[volts12m]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.5&1.3.6.1.4.1.10876.2.1.1.1.1.6.5:public at local
host
#SetEnv[volts12m]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="volts12m"
#Colours[volts12m]: YELLOW#FFFF00,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
#YLegend[volts12m]: Voltage
#LegendI[volts12m]: Current
#LegendO[volts12m]: Min
#ShortLegend[volts12m]: V
#MaxBytes[volts12m]: 14000
#Options[volts12m]: gauge, transparent
#Title[volts12m]: -12V Voltage

# .1.6.4 = min, .1.4.4 = current, .1.5.4 = max
Target[volts12p]:
1.3.6.1.4.1.10876.2.1.1.1.1.4.4&1.3.6.1.4.1.10876.2.1.1.1.1.6.4:public at local
host
SetEnv[volts12p]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="volts12p"
Colours[volts12p]: YELLOW#FFFF00,RED#FF0000,DARK GREEN#006600,VIOLET#ff00ff
YLegend[volts12p]: Voltage
LegendI[volts12p]: Current
LegendO[volts12p]: Min
ShortLegend[volts12p]: V
MaxBytes[volts12p]: 14000
Options[volts12p]: gauge, transparent
Title[volts12p]: +12V Voltage

-- 
The content of this e-mail is confidential, may contain privileged material
and is intended solely for the recipient(s) named above. If you receive this
in error, please notify Software AG immediately and delete this e-mail.

Software AG (UK) Limited
Registered in England & Wales 1310740
Registered Office: Hudson House, Hudson Way,
Pride Park, Derby DE24 8HS

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi