[mrtg] Re: Issue with >100%

[William Owen]

Sorry, I should have included my config file to begin with:

### Interface 2 >> Descr: 'Ethernet1' | Name: 'Et1' | Ip: 'x.x.x.x' | Eth:
'xx-xx-xx-xx-xx-xx' ###

Options[x.x.x.x_2]: bits
XSize[x.x.x.x_2]: 575
YSize[x.x.x.x_2]: 150
Target[x.x.x.x_2]: 2:toybox at x.x.x.x:
SetEnv[x.x.x.x_2]: MRTG_INT_IP="x.x.x.x" MRTG_INT_DESCR="Ethernet1"
MaxBytes[x.x.x.x_2]: 32000
AbsMax[x.x.x.x_1]: 1250000
Title[x.x.x.x_2]: Public Interface (Ethernet 1) -- TBRT1
PageTop[x.x.x.x_2]: <H1>Public Interface (Ethernet 1) -- TBRT1</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>TBRT1 in </TD></TR>
   <TR><TD>Description:</TD><TD>Ethernet1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Et1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>256 KBit/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>x.x.x.x</TD></TR>
 </TABLE>

-----Original Message-----
From: Peter Glanville [mailto:peter_glanville at cuk.canon.co.uk] 
Sent: Wednesday, December 17, 2003 9:47 AM
To: William Owen
Subject: Re: [mrtg] Issue with >100%



> MaxBytes[publicside]: Guaranteed throughput(256Mb)
> AbsoluteMax[publicside]: Maximum Interface speed (100Mb)

Have you made typos here, or in your config file?

You should have
Maxbytes[publicside]: 32000
AbsMax[publicside]: 12500000

ie maxbyes set to a value of kiloBytes 32KBytes=32x8=256Kbits
and the AbsMax (not AbsoluteMax) set higher 12.5MBytes = 100Mbits

Peter





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi