[mrtg] Re: MRTG Limitation

[Jonathan P. Tornea]

Thanks.




James Overbeck <grendel at gmo.jp>
Sent by: mrtg-bounce at list.ee.ethz.ch
02/03/2003 01:24 PM

 
        To:     mrtg at list.ee.ethz.ch
        cc: 
        Subject:        [mrtg] Re: MRTG Limitation



You would need a beastly machine to get it to work.

We originally used MRTG to monitor a growing number of Catalyst switches. 
As
the number of switches increased we found it was killing the machine. We
were forced to switch to Cricket. We have about the same number of 
switches
ourself now, about 150. Cricket is not as easy to configure but it is much
less burdensome on the machine running it.

I would say give MRTG a try, and if the machine's 15 minute load average
stays over 2 then switch to Cricket.

-james

Jonathan P. Tornea wrote:
> Hi,
> 
> Am planning to use MRTG to monitor errors, crc and discards on Cat2900 
per 
> interface.  Now we have more than 150 24-port switches on the whole 
> network.  Can MRTG scale to this large number of objects to monitor? 
> Approx more than 3600 objects.  Thanks.
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi