[mrtg] No data from Cisco 3524XLs

Jason Lixfeld jlixfeld at fastvibe.com
Fri Feb 14 21:15:28 MET 2003


I have two Cisco 3524XL switches, both running 12.0(5.2)XU.  MRTG runs, 
updates the rrd dbs but there is no data when router.cgi polls the 
rrds.  Wondering if anyone has experienced similar issues with this 
load of software.  In the meantime, attached are the configs for the 
two switches.  They were generated by cfgmaker so it has been verified 
that the switches are reachable and snmp accessible.  After running 
mrtg against these files, the rrd's are created and updated each time 
mrtg is run:

[jlixfeld at blackbox mrtg]$ ls -l 
/services/monitoring/content/mrtg/rrd/3524.fastvibe.com/
total 972
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_fastethernet0_11.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_fastethernet0_1.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_fastethernet0_2.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_fastethernet0_3.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_fastethernet0_5.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_fastethernet0_7.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_fastethernet0_9.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_gigabitethernet0_2.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
3524.fastvibe.com_vlan1.rrd
[jlixfeld at blackbox mrtg]$ ls -l 
/services/monitoring/content/mrtg/rrd/frn2-s1.tor.fastvibe.com/
total 2376
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_10.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_11.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_12.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_14.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_15.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_17.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_18.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_19.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_20.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_21.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_23.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_24.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_2.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_3.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_4.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_5.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_7.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_8.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_fastethernet0_9.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_gigabitethernet0_1.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_vlan1.rrd
-rw-r--r--    1 nobody   nobody     105156 Feb 14 15:10 
frn2-s1.tor.fastvibe.com_vlan32.rrd
[jlixfeld at blackbox mrtg]$

I have other routers and switches that are being monitored using the 
same templates as what was used to create the two configuration files 
attached.  I'm not having problems with any of them, only these two 
switches.

Any ideas would be welcome.



-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 21k (22521 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/3524.cfg


-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Size: 22k (22897 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/frn2-s1.cfg


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list