[mrtg] Re: Graphing Pings to router
Samson Martinez
smartine at motive.com
Fri Feb 14 21:43:41 MET 2003
Here's a sampling of the snmpwalk info:
snmpwalk 10.10.10.10 Snmpstring .1.3.6.1.2.1.5.8
icmp.icmpInEchos.0 = Counter32: 2061322959
snmpwalk 10.10.10.10 Snmpstring .1.3.6.1.2.1.5.8
icmp.icmpInEchos.0 = Counter32: 2061327169
snmpwalk 10.10.10.10 Snmpstring .1.3.6.1.2.1.5.8
icmp.icmpInEchos.0 = Counter32: 2061332438
snmpwalk 10.10.10.10 Snmpstring .1.3.6.1.2.1.5.8
icmp.icmpInEchos.0 = Counter32: 2061335787
snmpwalk 10.10.10.10 Snmpstring .1.3.6.1.2.1.5.8
icmp.icmpInEchos.0 = Counter32: 2061341047
These samplings were actually taken by just hitting the up-arrow immediately after each result, a good indication of how many hits this router is taken. And folks are wondering why we are averaging about 75% CPU utilization on this guy :)
Once again, many thanks for all assistance.
-Samson
-----Original Message-----
From: PAUL WILLIAMSON [mailto:pwilliamson at mandtbank.com]
Sent: Friday, February 14, 2003 2:34 PM
To: jheidtke at fmlh.edu; mrtg at list.ee.ethz.ch; Samson Martinez
Subject: [mrtg] Re: Graphing Pings to router
Is the OID a counter? Have you tried doing manual
snmpgets to the device? If so, what are the results?
Could it be that MaxBytes is too low?
Paul
>>> "Samson Martinez" <smartine at motive.com> 02/14/03 03:27PM >>>
I've actually tried removing gauge and my graphs go to zero. Believe it or not, this router is getting hit by more than 100 pings per second. Yep, that's per second. Long story short, thousands of customers were configured to ping this router as a test of connectivity, a very bad thing considering how the routers handle localized ping traffic. Graphing it is a way of showing management how bad it is.
Thanks again.
-Samson
-----Original Message-----
From: Jerry Heidtke [mailto:jheidtke at fmlh.edu]
Sent: Friday, February 14, 2003 2:17 PM
To: Samson Martinez; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Graphing Pings to router
Get rid of gauge in your options.
Jerry
-----Original Message-----
From: Samson Martinez [mailto:smartine at motive.com]
Sent: Friday, February 14, 2003 2:12 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Graphing Pings to router
Hello,
I'm trying to track ICMP traffic to a Cisco 7204VXR. I have the correct
OIDs and what I thought should be a working config (shown below). These
routers are currently experiencing a ton of ICMP echos (long story and
they are valid) but the graph only shows a MAX of 1. I know I'm missing
something. Any ideas? Again, here's the config minus all the html stuff.
Thanks!
-Samson
Target[router_icmp]:1.3.6.1.2.1.5.1&1.3.6.1.2.1.5.8:string at router:
Directory[router_icmp]: icmp-stats
YLegend[router_icmp]: ICMP Total Packets
ShortLegend[router_icmp]: icmp
MaxBytes[router_icmp]: 1000000000
AbsMax[router_icmp]: 1000000000
Options[router_icmp]: growright, nopercent, gauge
Title[router_icmp]: router ICMP Stats
Legend1[router_icmp]: Inbound ICMP Packets (all)
Legend2[router_icmp]: Inbound ICMP Packets (PING only)
LegendI[router_icmp]: All
LegendO[router_icmp]: Ping
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list