[mrtg] Re: Speed from serial interface being returned as 0 commenting out entry

Greg.Volk at edwardjones.com Greg.Volk at edwardjones.com
Wed Jan 8 15:31:06 MET 2003


 
}
}After running cfgmaker against an Enterasys 1805 router, the resulting
}configuration file has all the serial interfaces commented out with the
}following reason:
}
}### The following interface is commented out because:
}
}### * has a speed of 0 which makes no sense
}

What happens when you
snmpwalk router public .1.3.6.1.2.1.2.2.1.5

You should get something like:
interfaces.ifTable.ifEntry.ifSpeed.1 = Gauge: 10000000
interfaces.ifTable.ifEntry.ifSpeed.2 = Gauge: 10000000
interfaces.ifTable.ifEntry.ifSpeed.3 = Gauge: 10000000
interfaces.ifTable.ifEntry.ifSpeed.4 = Gauge: 10000000
interfaces.ifTable.ifEntry.ifSpeed.5 = Gauge: 2500000000
interfaces.ifTable.ifEntry.ifSpeed.6 = Gauge: 155520000
interfaces.ifTable.ifEntry.ifSpeed.7 = Gauge: 100000000

but I suspect you're getting all zeros back for the 
interfaces that correspond to your serials.

My suggestion would be to assign the speed of each serial
interface via Enterasys's equivalent of the "bandwidth"
directive on Ciscos and see if that fixes it.

If you have support, it's probably worth a call to Enterasys 
to see what they say about it.



-- Attached file removed by Ecartis and put at URL below --
-- Type: application/ms-tnef
-- Size: 2k (2471 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/33-WINMAIL.DAT


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list