[mrtg] Re: Error

Ravi Kanth Chaganti (IS) ravik at wiprofluidpower.co.in
Fri Jan 10 10:08:39 MET 2003 

I tried using CFGMAKER to create a configuration file.
It gave all these errors.

What does this Can't resolve d to IP Address mean?...

C:\mrtg-2.9.25\bin>perl cfgmaker public at 127.0.0.1 --global 'WorkDir:
d:\inetpub\wwwroot\mrtg' --output server.cfg
--base: Get Device Info on public at 127.0.0.1:
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache public at 127.0.0.1: Descr MS TCP Loopback interface --> 1
--snpo: confcache public at 127.0.0.1: Descr Intel(R) PRO Adapter --> 2
--snpo: confcache public at 127.0.0.1: Ip 127.0.0.1 --> 1
--snpo: confcache public at 127.0.0.1: Ip 192.9.200.8 --> 2
--snpo: confcache public at 127.0.0.1: Type 24 --> 1
--snpo: confcache public at 127.0.0.1: Type 6 --> 2
--snpo: confcache public at 127.0.0.1: Eth  --> 1
--snpo: confcache public at 127.0.0.1: Eth 00-d0-b7-b7-16-85 --> 2
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Get Device Info on public at d:\inetpub\wwwroot\mrtg'
Error:
  can't resolve "d" to IP address
SNMPGET Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because public at d:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ifDescr scanning because public at d:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because
public at d:\inetpub\wwwroot\mrtg' does not seem to support it
--snpo: Skipping ifType scanning because public at d:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ifPhysAddress scanning because
public at d:\inetpub\wwwroot\mrtg' does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
Error:
  can't resolve "d" to IP address
SNMPWALK Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Walking ifType
Error:
  can't resolve "d" to IP address
SNMPWALK Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Walking ifSpeed
Error:
  can't resolve "d" to IP address
SNMPWALK Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Walking ifAdminStatus
Error:
  can't resolve "d" to IP address
SNMPWALK Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Walking ifOperStatus
Error:
  can't resolve "d" to IP address
SNMPWALK Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Writing server.cfg
> -----Original Message-----
> From:	Brander, Eric [SMTP:Eric.Brander at ACS-INC.com]
> Sent:	Thursday, January 09, 2003 6:18 PM
> To:	'mrtg at list.ee.ethz.ch'
> Subject:	[mrtg] Re: Error
> 
> 
> Can you SNMPGET that OID manually? Do any other SNMP queries to this
> device
> work?  What OS are you running?
> 
> It appears that your config is fine, but that the OID you entered is not
> recognized. Where did you get it?  Did you install some extended SNMP
> setup
> in order to get this OID?
> 
> 
> -----Original Message-----
> From: Ravi Kanth Chaganti (IS) [mailto:ravik at wiprofluidpower.co.in]
> Sent: Thursday, January 09, 2003 5:03 AM
> To: 'mrtg at list.ee.ethz.ch'
> Subject: [mrtg] Error
> 
> 
> 
> 
> My MRTG.CFG is like this.....
> 
> Target[127.0.0.1-diskc]:.1.3.6.1.4.1.311.1.1.3.1.1.5.1.4.6.48.58.48.58.67.
> 58
> &1.3.6.1.4.1.311.1.1.3.1.1.5.1.4.6.48.58.48.58.67.58:public at 127.0.0.1
> AbsMax[127.0.0.1-diskc]: 100000 
> MaxBytes[127.0.0.1-diskc]: 100000 
> Title[127.0.0.1-diskc]: DISK FREE SPACE (C) 
> PageTop[127.0.0.1-diskc]: DISK FREE SPACE (C) 
> Options[127.0.0.1-diskc]: gauge,growright,nopercent, noo 
> YLegend[127.0.0.1-diskc]: DISK FREE SPACE (C) 
> ShortLegend[127.0.0.1-diskc]: MB 
> LegendI[127.0.0.1-diskc]: DISK FREE SPACE (C)&nbsp 
> 
> When I start MRTG ...Am getting this Error...
> SNMP Error:
> Received SNMP response with error code
>   error status: noSuchName
>   index 3 (OID: 1.3.6.1.2.1.1.3.0)
> SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
>                   community: "public"
>                  request ID: 478455403
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> SNMPGET Problem for .1.3.6.1.4.1.311.1.1.3.1.1.5.1.4.6.48.58.48.58.6
> .4.1.311.1.1.3.1.1.5.1.4.6.48.58.48.58.67.58 sysUptime sysName on pu
> .1
> WARNING: skipping because at least the query for .1.3.6.1.4.1.311.1.
> 4.6.48.58.48.58.67.58 on  127.0.0.1 did not succeed
> ERROR: Target[127.0.0.1-diskc][_IN_] ' $$target[4]{$mode} ' did not
> fined data
> ERROR: Target[127.0.0.1-diskc][_OUT_] ' $$target[4]{$mode} ' did not
> efined data
> WARNING: Skipping Update of 127.0.0.1-diskc, inlast is not defined
> WARNING: Skipping Update of 127.0.0.1-diskc, outlast is not defined
> 
> What is gone wrong with my cfg file?
> 
> Regards,
> Ravi Kanth CH
> Wipro Fluid Power Limited,
> Peenya Phase I,
> Bangalore 58
> Ph :
> Dir :3720341
>        8394982 Ext 103
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list