[mrtg] Re: Error

[Ravi Kanth Chaganti (IS)]

	Hi,

	Again same thing.

	C:\mrtg-2.9.25\bin>perl cfgmaker --global 'WorkDir:
d:\inetpub\wwwroot\mrtg' --output server.cfg public at 127.0.0.1
--base: Get Device Info on public at d:\inetpub\wwwroot\mrtg'
Error:
  can't resolve "d" to IP address
SNMPGET Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because public at d:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ifDescr scanning because public at d:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because
public at d:\inetpub\wwwroot\mrtg' does not seem to support it
--snpo: Skipping ifType scanning because public at d:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ifPhysAddress scanning because
public at d:\inetpub\wwwroot\mrtg' does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
Error:
  can't resolve "d" to IP address
SNMPWALK Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Walking ifType
Error:
  can't resolve "d" to IP address
SNMPWALK Problem for public at d:\inetpub\wwwroot\mrtg'
--base: Walking ifSpeed

> -----Original Message-----
> From:	Brett Marler [SMTP:brett at asroma.homeip.net]
> Sent:	Friday, January 10, 2003 3:12 PM
> To:	Ravi Kanth Chaganti (IS)
> Cc:	'mrtg at list.ee.ethz.ch'
> Subject:	Re: [mrtg] Re: Error 
> 
> Hello Ravi,
> 
> > What does this Can't resolve d to IP Address mean?...
> > 
> > C:\mrtg-2.9.25\bin>perl cfgmaker public at 127.0.0.1 --global 'WorkDir:
> > d:\inetpub\wwwroot\mrtg' --output server.cfg
> I think you have the syntax wrong there. If you run "cfgmaker" without any
> 
> options it mentions the correct syntax is:
> 
> --
> Usage:
>     cfgmaker [options] [community@]router [[options] [community@]router
> ...]
> --
> 
> So your command will need to look like:
> 
> --
> C:\mrtg-2.9.25\bin>perl cfgmaker --global 'WorkDir:
> d:\inetpub\wwwroot\mrtg' 
> --output server.cfg public at 127.0.0.1
> --
> 
> (i.e your supplying community at ip.address at the start instead of the end)
> 
> This should sort out your issues.
> 
> 
> Regards,
> Brett Marler.
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi