[mrtg] Re: Graph Scaling Question

[zjwoelle]

Be carefull with the MaxBytes option. If you set MaxBytes too low you
lose al data above MaxBytes. I don't know what the effect is on data
that is already collected.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Jim McAtee
Sent: zaterdag 18 januari 2003 2:40
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Graph Scaling Question


That may work - I don't think I've ever used unscaled graphs.  I kind of
like
having a constant scale to easily gauge % of utilization, especially if
I'm
looking through the graphs of multiple devices.  Ideally, I'd like to
set the
range for each graph (d/w/m/y), which I believe is currently controlled
by
maxbytes, and can only designated for the whole target, not the
individual
graph.

To tell the truth, I haven't experimented yet with simply setting
maxbytes to 24
and seeing what mrtg does to the m/y graphs.  I assume that it will just
plot
old values that were higher than 24 at the max of 24, rather than
letting the
graph scale larger.

Jim

----- Original Message -----
From: "Jerry Heidtke" <jheidtke at fmlh.edu>
To: "'Jim McAtee'" <jmcatee at mediaodyssey.com>; <mrtg at list.ee.ethz.ch>
Sent: Friday, January 17, 2003 2:15 PM
Subject: [mrtg] Re: Graph Scaling Question

> Just use "Unscaled[_]: "
>
> Each graph will scale automatically to show the minimum and maximum
values
> in it's time frame.
>
> I've got a graph tracking dial-in users to a Cisco AS5350. Right now,
the
> daily graph goes from 0-10, the max value is 10. The weekly and
monthly
> graphs' y-axis scales from 0-20, the max value is 12. The yearly graph
> y-axis scales from 0-30, the max value is 29.
>
> Or did you need something different?
>
> Jerry
>
> -----Original Message-----
> From: Jim McAtee [mailto:jmcatee at mediaodyssey.com]
> Sent: Friday, January 17, 2003 3:04 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Graph Scaling Question
>
>
>
> I have a device (PortMaster access router with modems) that previously
had a
> limit of 46 lines

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi