[mrtg] Re: Power Supply status

Daniel J McDonald dan.mcdonald at austinenergy.com
Fri Jul 18 13:27:48 MEST 2003


On Thu, 2003-07-17 at 22:17, fluhmann at vvm.com wrote:
> > Does anyone know the OID for the cisco chassis 4000 to monitor for power
> > supply status?  Thanks in advance
> 
> 
> Have you tried here:
>    http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Tis a little vague.  About like suggesting they go to the "great grey
wall" back in the VMS days (it's in one of the 100 manuals you have on
your shelf - have fun figuring out which one you need to open! ;-).

Anyway, a quick check of the entity mib on my Catalyst 4000 with a
Sup-III (IOS 12.1.13EW) shows no status for the power supplies, just a
note that the fans in the power supplies are blowing.  My 6500's (IOS
12.1.13E3 - yes, I know I have to upgrade to avoid the latest Cisco DOS
attack) do have a note about the power supplies.  The 5500 I've got
running CatOs 5.5.19 doesn't seem to support the Cisco Entity Sensor Mib
at all, although the entities themselves exist.  My 5500's running Catos
4.5.13a (love to upgrade these to avoid the CATos DOS attack, but I've
got no memory...) don't have any entities for the power supplies.  It
might be hiding somewhere else in the STACK-MIB, and I'll keep looking,
but I think you are out of luck.

[mcdonalddj at mcdonalddj-lnx mcdonalddj]$ snmpwalk -c public -m CISCO-ENTITY-SENSOR-MIB ecc-4000-0 entSensorValueTable
CISCO-ENTITY-SENSOR-MIB::entSensorType.9 = INTEGER: celsius(8)
CISCO-ENTITY-SENSOR-MIB::entSensorType.15 = INTEGER: truthvalue(12)
CISCO-ENTITY-SENSOR-MIB::entSensorType.18 = INTEGER: truthvalue(12)
CISCO-ENTITY-SENSOR-MIB::entSensorType.21 = INTEGER: truthvalue(12)
CISCO-ENTITY-SENSOR-MIB::entSensorScale.9 = INTEGER: units(9)
CISCO-ENTITY-SENSOR-MIB::entSensorScale.15 = INTEGER: units(9)
CISCO-ENTITY-SENSOR-MIB::entSensorScale.18 = INTEGER: units(9)
CISCO-ENTITY-SENSOR-MIB::entSensorScale.21 = INTEGER: units(9)
CISCO-ENTITY-SENSOR-MIB::entSensorPrecision.9 = INTEGER: 0
CISCO-ENTITY-SENSOR-MIB::entSensorPrecision.15 = INTEGER: 0
CISCO-ENTITY-SENSOR-MIB::entSensorPrecision.18 = INTEGER: 0
CISCO-ENTITY-SENSOR-MIB::entSensorPrecision.21 = INTEGER: 0
CISCO-ENTITY-SENSOR-MIB::entSensorValue.9 = INTEGER: 27
CISCO-ENTITY-SENSOR-MIB::entSensorValue.15 = INTEGER: 2
CISCO-ENTITY-SENSOR-MIB::entSensorValue.18 = INTEGER: 2
CISCO-ENTITY-SENSOR-MIB::entSensorValue.21 = INTEGER: 2
CISCO-ENTITY-SENSOR-MIB::entSensorStatus.9 = INTEGER: ok(1)
CISCO-ENTITY-SENSOR-MIB::entSensorStatus.15 = INTEGER: ok(1)
CISCO-ENTITY-SENSOR-MIB::entSensorStatus.18 = INTEGER: ok(1)
CISCO-ENTITY-SENSOR-MIB::entSensorStatus.21 = INTEGER: ok(1)
CISCO-ENTITY-SENSOR-MIB::entSensorValueTimeStamp.9 = Timeticks: (0) 0:00:00.00
CISCO-ENTITY-SENSOR-MIB::entSensorValueTimeStamp.15 = Timeticks: (0) 0:00:00.00
CISCO-ENTITY-SENSOR-MIB::entSensorValueTimeStamp.18 = Timeticks: (0) 0:00:00.00
CISCO-ENTITY-SENSOR-MIB::entSensorValueTimeStamp.21 = Timeticks: (0) 0:00:00.00
CISCO-ENTITY-SENSOR-MIB::entSensorValueUpdateRate.9 = INTEGER: 0
CISCO-ENTITY-SENSOR-MIB::entSensorValueUpdateRate.15 = INTEGER: 0
CISCO-ENTITY-SENSOR-MIB::entSensorValueUpdateRate.18 = INTEGER: 0
CISCO-ENTITY-SENSOR-MIB::entSensorValueUpdateRate.21 = INTEGER: 0
[mcdonalddj at mcdonalddj-lnx mcdonalddj]$ snmpwalk -c harry$ -m ENTITY-MIB ecc-4000-0 entityTable
entityTable: Unknown Object Identifier (Sub-id not found: (top) -> entityTable)
[mcdonalddj at mcdonalddj-lnx mcdonalddj]$ less /usr/local/share/snmp/mibs/EN
ENTITY-MIB-rfc2737.mib  ENTITY-MIB-V1SMI.my
[mcdonalddj at mcdonalddj-lnx mcdonalddj]$ snmpwalk -c public -m ENTITY-MIB ecc-4000-0 entityPhysical
[...]
ENTITY-MIB::entPhysicalDescr.9 = STRING: Chassis Temperature Sensor
ENTITY-MIB::entPhysicalDescr.10 = STRING: Container of Fan Tray
ENTITY-MIB::entPhysicalDescr.11 = STRING: FanTray
ENTITY-MIB::entPhysicalDescr.12 = STRING: Container of Container of Power Supply
ENTITY-MIB::entPhysicalDescr.13 = STRING: Container of Power Supply
ENTITY-MIB::entPhysicalDescr.14 = STRING: Power Supply ( AC 400W )
ENTITY-MIB::entPhysicalDescr.15 = STRING: Power Supply Fan Sensor
ENTITY-MIB::entPhysicalDescr.16 = STRING: Container of Power Supply
ENTITY-MIB::entPhysicalDescr.17 = STRING: Power Supply ( AC 400W )
ENTITY-MIB::entPhysicalDescr.18 = STRING: Power Supply Fan Sensor
ENTITY-MIB::entPhysicalDescr.19 = STRING: Container of Power Supply
ENTITY-MIB::entPhysicalDescr.20 = STRING: Power Supply ( AC 400W )
ENTITY-MIB::entPhysicalDescr.21 = STRING: Power Supply Fan Sensor
ENTITY-MIB::entPhysicalDescr.22 = STRING: Container of Power Entry Module(PEM)
-- 
Daniel J McDonald, CCIE #2495, CNX
LAN/WAN Integrator
Austin Energy

512-322-6739 (desk)
512-694-0654 (cell)

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list