[mrtg] Re: PVC vs. Port Speed question

[Waltman, Adam]

Exactly what I'm looking for.  Just to make sure, AbsMax to CIR and MaxBytes
to Port speed?

-----Original Message-----
From: David Ashbrook [mailto:dashbrook at dmisi.com]
Sent: Thursday, June 12, 2003 10:46 AM
To: MRTG
Cc: 'Waltman, Adam'
Subject: RE: [mrtg] PVC vs. Port Speed question


You can set your MaxBytes to the maximum you can burst over your CIR, then
you can set the AbsMax option to your CIR.  This will put a dotted red
line across the graph wherever you set it. 

Is this what you are looking for?

David Ashbrook

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Waltman, Adam
Sent: Thursday, June 12, 2003 9:34 AM
To: MRTG (E-mail)
Subject: [mrtg] PVC vs. Port Speed question

Greetings,

I use MRTG v 2.9.25 to monitor a bunch of router's bandwidth stats.
Lately, there has been some discrepancy between us and our ISP about how
much we are using, etc...  I monitor the PVC (CIR) speed in bps.  Many
times, the PVC isn't the same as the port speed.  Here's my questions:

1.  Is it possible for MRTG to monitor the PVC speed while showing bursts
above the CIR?  (I have the WithPeak option specified but that stays
within my stated PVC speed)

2.  If I leave it the way it is, is there a way MRTG can graph spikes
above the PVC or 100%?

Thanks in advance,
Adam

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi