[mrtg] Re: PVC vs. Port Speed question

[Heath Deschenes]

Not sure, but you might not be able to use AbsMax and unscaled together.
I notice that you have it commented out in this example. Is this the case
for all of your interfaces?
-----Original Message-----
From: Waltman, Adam [mailto:AWaltman at anacomp.com] 
Sent: Thursday, June 12, 2003 9:32 AM
To: MRTG (E-mail)
Subject: [mrtg] Re: PVC vs. Port Speed question


Last question.  Why would the AbsMax option cause MRTG to fail.  I added the
config in for the necessary routers but MRTG won't start.  I get this
message in the W2K event viewer when I try to restart the Fire Daemon
service:

Subprocess monitoring failed due to subprocess is no longer active.  The
subprocess is probably dead.  Restart the service.  Erro code: 0.

When I comment out the AbsMax, MRTG restarts just fine.  Here's a copy of my
config:

### Customer ###

Target[percent_10.60.13.2]: /10.60.13.2:snmp at customer * 100 / 375000
RouterUptime[percent_10.60.13.2]: snmp at customer
#Options[percent_10.60.13.2]: nopercent,growright
SetEnv[percent_10.60.13.2]: MRTG_INT_IP="10.60.13.2"
MRTG_INT_DESCR="ATM2/IMA0.55-aal5 layer"
Directory[percent_10.60.13.2]: customer
Maxbytes[percent_10.60.13.2]: 100
AbsMax[percent_10.60.13.2]: 150
#Unscaled[percent_10.60.13.2]: dwmy
Shortlegend[percent_10.60.13.2]: %
Ylegend[percent_10.60.13.2]: Bandwidth %
Legend1[percent_10.60.13.2]: Input Traffic Rate
Legend2[percent_10.60.13.2]: Output Traffic Rate
Title[percent_10.60.13.2]: Percent of Bandwidth Used by Customer_3640
Pagetop[percent_10.60.13.2]: <H1>Bandwidth Analysis for Customer  (Out -
represents transfers to Anacomp,
				 In - represents retrievals)</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Customer_3640</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Me</TD></TR>
   <TR><TD>Description:</TD><TD>ATM Connection to Me </TD></TR>
   <TR><TD>Interface Type:</TD>     <TD>ATM</TD></TR>
   <TR><TD>Interface Name:</TD>     <TD>ATM2/IMA0.55</TD></TR>
   <TR><TD>PVC Speed:</TD>  <TD>3000.0 kbits/s</TD></TR>
   <TR><TD>Port Speed:</TD>  <TD>4500.0 kbits/s</TD></TR>
   <TR><TD>IP Address:</TD>         <TD>10.60.13.2</TD></TR>
 </TABLE>

Is there some glaring problem?

Thanks,
Adam

-----Original Message-----
From: Daniel J McDonald [mailto:dan.mcdonald at austinenergy.com]
Sent: Thursday, June 12, 2003 10:58 AM
To: Waltman, Adam
Cc: mrtg
Subject: Re: [mrtg] Re: PVC vs. Port Speed question


On Thu, 2003-06-12 at 09:55, Waltman, Adam wrote:
> Exactly what I'm looking for.  Just to make sure, AbsMax to CIR and
MaxBytes
> to Port speed?

Nope.  Absmax to PIR and MaxBytes to CIR.
-- 
Daniel J McDonald, CCIE 2495, CNX
Austin Energy

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi