[mrtg] TRANGO M5800S

[Reza Iskandar Achmad]

Hello, I have problem on monitoring TrangoBroad

When I use snmp command to communicate to the device, it work and does 
not return error respons.

shiro at xudu:~> snmpwalk 10.12.10.100 public enterprises.5454.1.10.1.15.1
enterprises.5454.1.10.1.15.1.0 = 568

shiro at xudu:~> snmpwalk 10.12.10.100 public enterprises.5454.1.10.1.15.2
enterprises.5454.1.10.1.15.2.0 = 187

after that, I create mrtg.cfg like this,


#-----------------------mrtg.cfg------------------------------------
Workdir: /home/shiro/mrtg/cfg
Logdir: /home/shiro/mrtg/httpd
#Unscaled[_]: ymwd
Options[_]: bits, growright
#ShortLegend[_]: b/s
LoadMIBs: /usr/share/snmp/mibs/TRANGO-MIB.txt
######################################################################
# System: Orang Wireless Jetcoms
# Description: Trango Systems Inc. SNMP agent for M5800S
# Contact: Jetcoms AP
# Location: Sebelah RCTI
######################################################################
Target[Trango_100]:enterprises.5454.1.10.1.15.1&enterprises.5454.1.10.1.15.2:public at 10.12.10.100
Title[Trango_100]: Trango 100
MaxBytes[Trango_100]: 3000000

#----------------------End of mrtg.cfg----------------------------


TRANGO-MIB.txt is file which contains MIB from trango CD distribution

then I run mrtg command, It give me error message like this

shiro at xudu:~> /usr/bin/mrtg mrtg/cfg/mrtg.cfg
SNMP Error:
Received SNMP response with error code
   error status: noSuchName
   index 3 (OID: 1.3.6.1.2.1.1.3.0)
SNMPv1_Session (remote host: "10.12.10.100" [10.12.10.100].161)
                   community: "public"
                  request ID: 628659165
                 PDU bufsize: 8000 bytes
                     timeout: 2s
                     retries: 5
                     backoff: 1)
  at /usr/bin/../lib/mrtg2/SNMP_util.pm line 458
SNMPGET Problem for enterprises.5454.1.10.1.15.1 
enterprises.5454.1.10.1.15.2 sysUptime sysName on public at 10.12.10.100
  at /usr/bin/mrtg line 1621
WARNING: skipping because at least the query for 
enterprises.5454.1.10.1.15.1 on  10.12.10.100 did not succeed
ERROR: Target[trango_100][_IN_] ' $$target[0]{$mode} ' did not eval into 
defined data
ERROR: Target[trango_100][_OUT_] ' $$target[0]{$mode} ' did not eval 
into defined data
WARNING: Skipping Update of trango_100, inlast is not defined
WARNING: Skipping Update of trango_100, outlast is not defined

Can anyone give advice in order to get mrtg graphic to monitor my Trango AP?

Sorry for my bad english, I'm Indonesian :-)

regards,


Reza Iskandar Achmad


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi