[mrtg] Re: Monitoring one value

[Zeeshan Ahmed]

use the same OID 2 times like

Target[10.1.1.249-ebno]:.1.3.6.1.4.1.2591.3.7.1.17.4$1.3.6.1.4.1.2591.3.7.1.
17.4:public at 10.1.1.249

and then use

Options[_]: noo

I hope this will work.

Regads
Zeeshan Ahmed

----- Original Message -----
From: "Jacob Smith" <jacob at globalsat.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Wednesday, March 05, 2003 12:09 AM
Subject: [mrtg] Monitoring one value


>
> I am new to mrtg and have a couple questions....
>
> I am monitoring a specific OID to return values from a satellite modem.  I
> only want to measure one value, such as eb/no but mrtg asks for 2 values
in
> order to graph.  How can I just graph this one value returned?
>
> I know that this will not work :
>
> Target[10.1.1.249-ebno]:.1.3.6.1.4.1.2591.3.7.1.17.4:public at 10.1.1.249
>
> This will work:
>
Target[10.1.1.249-ebno]:.1.3.6.1.4.1.2591.3.7.1.17.4&.1.3.6.1.4.1.2591.3.7.1
> .17.4:public at 10.1.1.249
>
> But is this what I want to graph, 2 values of the same thing?
>
> I would also like to format the scale on the output of the graph.  A
sample
> value returned would be 1450, which shows up ok on the graph, but I would
> like to format it as 14.50, is this possible?
>
> Any input would be greatly appreciated.  Thank You.
>
> Jacob R. Smith
> Teleport Technician
> Globalsat Communications
> jacob at globalsat.com
> (301)-490-6414
>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi