[mrtg] Getting values, but empty graphs

[Andy Dills]

I apologize in advance if this is something I should have found without
asking. It seems the mailing list isn't searchable, and I couldn't find
this addressed anywhere else.

I've run mrtg for around 6 years or so, and I've run into my first
difficulty.

I'm graphing amp loads on the various legs of our Liebert series 300 UPS.

I obtained the OIDs by digging through their mib and through snmpwalking.
The OIDs are good, and the data obtained from a manual snmpget is
consistent with the data at the top of the log files.

Here's a sample config:

Target[5_2]: .1.3.6.1.4.1.476.1.1.1.1.4.4.1.3.1&.1.3.6.1.4.1.476.1.1.1.1.4.4.1.3.1:com at ip:
MaxBytes[5_2]: 1000
Title[5_2]: Liebert DC UPS1 - Amps on Leg 1
YLegend[5_2]: Amps
ShortLegend[5_2]: A
Legend1[5_2]: Amps
Legend2[5_2]: Amps
Legend3[5_2]: Max Amps
Legend4[5_2]: Max Amps
PageTop[5_2]: <H1>Liebert DC UPS1 - Amps on Leg 1</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Liebert DC UPS1 in Frederick NOC</TD></TR>
   <TR><TD>Description:</TD><TD>Liebert UPS Leg 1 Amp Usage </TD></TR>
 </TABLE>

And here's the top of the log file:

1047508264 2 2
1047508264 0 0 0 0
1047508244 0 0 0 0
(etc)

Yet, when I look at the graphs, I get nothing but 0s regardless.

Any ideas why? Could it have something to do with the fact that regardless
of the number of samples (been running for a few hours now), the only line
with any data is the top of the log? And if so, what could be causing
that?

Thanks,
Andy

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Andy Dills                              301-682-9972
Xecunet, LLC                            www.xecu.net
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Dialup * Webhosting * E-Commerce * High-Speed Access



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi