[mrtg] Re: MRTG and Cisco 3640

[mnealon at conversent.com]

  If you ran cfgmaker with that --global 'Options[_]: bits' option it would
have created a new "pagetop" HTML snippet representing bits per sec (unless
of course your using a version contains a bug).

  If you simply added the "bits" option to the config manually, the
"pagetop" section would be the same as before (Bytes).

-Mike

-----Original Message-----
From: Scott Miller [mailto:srmiller at interbel.net]
Sent: Tuesday, March 25, 2003 6:03 PM
To: mnealon at conversent.com
Subject: Re: [mrtg] MRTG and Cisco 3640


Added the --global 'Options[_]: bits' option, and it did actually change the
graph, it is now showing bits not bytes.  But, it still reads:

ifType: propPointToPointSerial (22)
ifName: Se0/0
Max Speed: 193.0 kBytes/s

at the top of the page that displays the graphs.  Does this need to be
manually edited now, or will it fix itself?

Scott


----- Original Message -----
From: <mnealon at conversent.com>
To: <srmiller at interbel.net>; <mrtg at list.ee.ethz.ch>
Sent: Tuesday, March 25, 2003 3:34 PM
Subject: RE: [mrtg] MRTG and Cisco 3640


>
>   Sounds like you are looking at Bytes per second instead of bits per
> second.  If you want to use configmaker add this to the command line:
>
> --global 'Options[_]: bits'
>
>   Or just edit the conf, add "bits" to the options, global or per
instance.
>
> -Mike
>
>
>
> -----Original Message-----
> From: Scott Miller [mailto:srmiller at interbel.net]
> Sent: Tuesday, March 25, 2003 5:26 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] MRTG and Cisco 3640
>
>
> I have MRTG installed on my up2date RedHat 7.2 box - but the graphs seem
to
> be coming out wrong.  I've ran the configmaker, and it found my router and
> all the ports, but reports that my two serial (T-1) ports are only running
> at 193K each.  They should be a full 1.545MB each.  Is this something that
> needs to be re-configured within MRTG, or something I need to look at on
my
> router?
>
> Thanks
> Scott Miller
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi