[mrtg] Re: Calling MIBs

[Peter Glanville]

> Target[temp1]:
.1.3.6.1.4.1.1718.3.2.5.1.6&.1.3.6.1.4.1.1718.3.2.5.1.6:public at 10.6.16.xyz
>
>There isn't much there. What's wrong?

The above OID is listed in the MIBs, but does the box support it?
Walk the MIB (eg using GetIf) and see what is there. That will also show
the correct instance number if needed.

PS. You do not NEED a MIB in MRTG.
A MIB merely translates Name to OID number
eg ifInOctets = .1.3.6.1.2.1.2.2.1.10
So if you wish to specify the Name on the Target line, MRTG needs to have
the MIB to translate.
If you are going to specify the full OID, Mrtg does not need the MIB.

Peter





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi