[mrtg] AW: Re: AW: Re: cammer
Braendle, Juergen
Braendle at medianet.freinet.de
Mon Oct 20 10:10:10 MEST 2003
>-----Ursprüngliche Nachricht-----
>Von: Daniel J McDonald [mailto:dan.mcdonald at austinenergy.com]
>Gesendet: Montag, 13. Oktober 2003 14:55
>An: Braendle, Juergen
>Cc: 'mrtg at list.ee.ethz.ch'
>Betreff: [mrtg] Re: AW: Re: cammer
>On Mon, 2003-10-13 at 07:13, Braendle, Juergen wrote:
>> Hi there,
>>
>> where can we find your "new" version of cammer?
>> The new stuff is quite interesting.
>http://www.austinnetworkdesign.com/mrtg/
>I put that version up a while back. I'll post updates there when I can.
>--
>Daniel J McDonald <dan.mcdonald at austinenergy.com>
>Austin Energy
Hi there,
On Friday I tried to get you new cammer stuff to work
But I get a strange error message (see below this message).
The switch is a Cisco 2924C-XL see "sh ver" below.
I also tried some other Cisco Switches but I could not get anything to work.
Maybe there is a problem with the "community at vlan stuff".
Any help welcome
Greetings from Germany
J. Brändle
swi-mn-02#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-H2S-M), Version 12.0(5.1)XP,
MAINTENANCE
INTERIM SOFTWARE
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Fri 10-Dec-99 10:57 by cchang
Image text-base: 0x00003000, data-base: 0x002BA814
ROM: Bootstrap program is C2900XL boot loader
swi-mn-02 uptime is 2 years, 14 weeks, 5 days, 3 hours, 32 minutes
System returned to ROM by power-on
System restarted at 05:50:47 MET Mon Jul 9 2001
System image file is "flash:c2900XL-h2s-mz-120.5.1-XP.bin"
cisco WS-C2924C-XL (PowerPC403GA) processor (revision 0x11) with
8192K/1024K
bytes of memory.
Processor board ID 0x0F, with hardware revision 0x01
Last reset from power-on
Processor is running Enterprise Edition Software
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:D0:58:FD:60:40
Motherboard assembly number: 73-3381-04
Power supply part number: 34-0834-01
Motherboard serial number: FAA03159H96
Power supply serial number: PHI031201NC
Model revision number: A0
Model number: WS-C2924C-XL-A
System serial number: FAA0322K0PY
Configuration register is 0xF
netmaster:/usr/local/medianet/Software/NETSTUFF/cammer-1.5# ./cammer.pl
* Gather VLAN index Table from Switch xxx.xxx.xxx.xxx
* Going into Cisco 2900/3500 Mode
* Gather Interface Name Table from Switch 1 3 6 1 2 1 31 1 1 1 1
* Gather Trunking Status from switch 1 3 6 1 4 1 9 9 46 1 6 1 1 14
* Gather Arp Table from Router 1 3 6 1 2 1 4 22 1 2
* Gather Interface Name Table from Router 1 3 6 1 2 1 31 1 1 1 1
* Gather Mac 2 Port and Port 2 Interface table for all VLANS comunity at vlan
1 3
6 1 2 1 17 4 3 1 2, 1 3 6 1 2 1 17 1 4 1 2
do vlan 1
SNMP Error:
no response received
SNMPv2c_Session (remote host: "xxx.xxx.xxx.xxx" [xxx.xxx.xxx.xxx].161)
community: "snmpcompwd at 1"
request ID: -1177659889
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/perl5/site_perl/5.005/SNMP_Session.pm line 1006
SNMP Error:
no response received
SNMPv2c_Session (remote host: "xxx.xxx.xxx.xxx" [xxx.xxx.xxx.xxx].161)
community: "snmpcompwd at 1"
request ID: -1177659888
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/perl5/site_perl/5.005/SNMP_Session.pm line 1006
do vlan 9
SNMP Error:
no response received
SNMPv2c_Session (remote host: "xxx.xxx.xxx.xxx" [xxx.xxx.xxx.xxx].161)
community: "snmpcompwd at 9"
request ID: 1514973435
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/perl5/site_perl/5.005/SNMP_Session.pm line 1006
SNMP Error:
no response received
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list