[mrtg] Re: Cisco PIX 515E

Peter P. Benac ppbenac at emacolet.com
Fri Sep 19 20:18:09 MEST 2003

Did you setup the PIX to allow polling from the workstation that is running
MRTG.. If you didn't you can try till you turn blue it won't happen..

Peter P. Benac, CCNA
Emacolet Networking Services, Inc
Providing Systems and Network Consulting, Training, Web Hosting Services
Phone: 919-847-1740 or 866-701-2345
Web: http://www.emacolet.com
Need quick reliable Systems or Network Management advice visit

To have principles...
             First have courage.. With principles comes integrity!!!

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch
> [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of Alan Rader
> Sent: Friday, September 19, 2003 14:09
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Cisco PIX 515E
> I get the same thing using ver 2.
> --base: Get Device Info on community at ip:::::2
> SNMP Error:
> no response received
> SNMPv2c_Session (remote host: "ip" [ip].161)
>                    community: "community"
>                   request ID: -500809881
>                  PDU bufsize: 8000 bytes
>                      timeout: 2s
>                      retries: 5
>                      backoff: 1)
> SNMPWALK Problem for on community at ip:::::2

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list