[mrtg] Re: Cisco PIX 515E

[Hart, Kevin]

Did you configure the inside IP of the MRTG box to allow it access to the
PIX?

snmp-server host inside X.X.X.X

-----Original Message-----
From: Alan Rader [mailto:darlists at bakerd.com]
Sent: Friday, September 19, 2003 2:09 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Cisco PIX 515E



I get the same thing using ver 2.

--base: Get Device Info on community at ip:::::2
SNMP Error:
no response received
SNMPv2c_Session (remote host: "ip" [ip].161)
                   community: "community"
                  request ID: -500809881
                 PDU bufsize: 8000 bytes
                     timeout: 2s
                     retries: 5
                     backoff: 1)
SNMPWALK Problem for 1.3.6.1.2.1.1 on community at ip:::::2



-----Original Message-----
From: David Gabler [mailto:dgabler at TRUELINK.com] 
Sent: Thursday, September 18, 2003 5:01 PM
To: Alan Rader
Subject: RE: [mrtg] Re: Cisco PIX 515E


If my memory serves me right you need to use snmp version 2.

> -----Original Message-----
> From: Alan Rader [mailto:darlists at bakerd.com]
> Sent: Thursday, September 18, 2003 12:50 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Cisco PIX 515E
> 
> 
> 
> I am new to the PIX and want to do the same.  Quick question if anyone

> can easily answer.  I setup the community string on my PIX, but I get 
> the below error.  I don't see any rules to deny inside snmp traffic.  
> I also tried Getif and it says no snmp response.
> 
> --base: Get Device Info on xxxx at y.y.y.y:
> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "y.y.y.y" [y.y.y.y].161)
>                   community: "xxxx"
>                  request ID: 1464475559
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> SNMPWALK Problem for 1.3.6.1.2.1.1 on xxxx at y.y.y.y:
> 
> Thanks
> 
> 
> -----Original Message-----
> From: Brad Covell [mailto:bcovell at sagestone.com]
> Sent: Thursday, September 18, 2003 9:32 AM
> To: Gustau; mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Cisco PIX 515E
> 
> 
> 
> These are the targets I use.
> 
> CPU
> Target[cpu_usage]: 
> 1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.
> 1:public at ip
> 
> 
> Memory
> Target[192.168.0.100_mem]:
> 1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:public%%@ip
> 
> 
> Connections
> Target[192.168.0.100_cnx1]:
> 1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6&1.3.6.1.4.1.9.9.147.1.2.2
> .2.1.5.40.7:public at ip
> 
>

--------------------------------------------
ATTENTION:  This message and all attachments are PRIVATE, and may contain
information that is CONFIDENTIAL and PRIVILEGED.  
If you received this message in error, please notify the sender by reply 
e-mail and delete the message immediately.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi