[mrtg] Dell multiprocessor server and threading..

[Tim Reimers]

Hi everyone-

I've got a question for someone(s) who has experience with Dell servers
and multithreading-

I'm graphing one of the CPU's in my Dell server using the following OID
for both entries in the mrtg.cfg for that server-


1.3.6.1.2.1.25.3.3.1.2.2

What I don't understand how to handle is this:

the server is a four-processor server, but an snmpwalk returns this:

HOST-RESOURCES-MIB::hrProcessorFrwID.2 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorFrwID.3 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorFrwID.4 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorFrwID.5 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorFrwID.6 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorFrwID.7 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorFrwID.8 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorFrwID.9 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorLoad.2 = INTEGER: 14
HOST-RESOURCES-MIB::hrProcessorLoad.3 = INTEGER: 1
HOST-RESOURCES-MIB::hrProcessorLoad.4 = INTEGER: 0
HOST-RESOURCES-MIB::hrProcessorLoad.5 = INTEGER: 9
HOST-RESOURCES-MIB::hrProcessorLoad.6 = INTEGER: 13
HOST-RESOURCES-MIB::hrProcessorLoad.7 = INTEGER: 4
HOST-RESOURCES-MIB::hrProcessorLoad.8 = INTEGER: 7
HOST-RESOURCES-MIB::hrProcessorLoad.9 = INTEGER: 10


Which are 'real' processors-
is 2 and 3 the first processor
4 and 5 the next one, and so on?

How would I set up a config to graph either: one processor per graph
or two on one graph? (and have two graphs for CPUs in the server)
I'm not sure which OID(s) to use

Tim


http://www.gordano.com - Messaging for educators.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi