[mrtg] Re: ima interface

Cook, Garry GWCOOK at mactec.com
Thu Feb 12 16:23:26 MET 2004


Sherwin T wrote:
> Hi Cook!
> 
> Adding of subinterface is working fine but it's not easy to manage.
> 
> I'm just wondering if I'm going to show interface to
> interface ATM4/ima0 there is a traffic but unable to graph
> -----------------------
> interface ATM4/ima0
>  description 1st DSL Backhaul
>  no ip address
>  no atm ilmi-keepalive
> ------------------------
> 
> While, the subinterface is working fine.
> -----------------------------------------
> !
> interface ATM4/ima0.2 point-to-point
>  description ABC Co.
>  bandwidth 256
>  ip address 204.231.117.33 255.255.255.248
>  no ip redirects
>  no ip unreachables
>  atm route-bridged ip
>  pvc 0/36
>   encapsulation aal5snap
>  !
> --------------------------------------------
> The only difference with them is, the sub interface
> has an IP address while the other one is none.
 

Well, my original suggestions still stand, you could simply add the
targets of the subinterfaces to make the target of the IMA Bundle,
either within the config on the target line, or if you use the
routers2.cgi front-end.

Looking at my config, the IMA Bundle is graphing just fine, without
having to add the subs together. This is what I have in my config,
generated by configmaker (some data changed to protect the network of
course, IP address, community string and descriptions).

### Interface 50 >> Descr: 'ATM2/IMA0' | Name: 'AT2/IMA0' | Ip: '' |
Eth: '' ###

#-#Total[10.0.0.1_ATM2_IMA0]: Totals 10.0.0.1 in Alpharetta, GA
Interface ATM2/IMA0 / 
Target[10.0.0.1_ATM2_IMA0]: \ATM2/IMA0:<snmp_community>@10.0.0.1:
SetEnv[10.0.0.1_ATM2_IMA0]: MRTG_INT_IP="" MRTG_INT_DESCR="ATM2/IMA0"
Title[10.0.0.1_ATM2_IMA0]: ATM2/IMA0 AT&amp;T IMA Bundle, CID
DHEC.123456.801A, 4xT1.5, 6144k  -- nnn.mactec.com
Legend1[10.0.0.1_ATM2_IMA0]: Avg Input Traffic Bytes/sec
Legend2[10.0.0.1_ATM2_IMA0]: Avg Output Traffic Bytes/sec
Legend3[10.0.0.1_ATM2_IMA0]: Maximal Input Traffic Bytes/sec
Legend4[10.0.0.1_ATM2_IMA0]: Maximal Output Traffic Bytes/sec
MaxBytes[10.0.0.1_ATM2_IMA0]: 768000
AbsMax[10.0.0.1_ATM2_IMA0]: 960000
PageTop[10.0.0.1_ATM2_IMA0]: <H1>ATM2/IMA0 AT&amp;T IMA Bundle, CID
DHEC.123456.801A, 4xT1.5, 6144k  -- nnn.mactec.com</H1>
  <TABLE>
    <TR><TD>System:</TD>     <TD>nnn.mactec.com in Alpharetta,
GA</TD></TR>
    <TR><TD>Maintainer:</TD> <TD>Garry W. Cook -
gwcook at mactec.com</TD></TR>
    <TR><TD>Description:</TD><TD>ATM2/IMA0 AT&amp;T IMA Bundle, CID
DHEC.123456.801A, 4xT1.5, 6144k </TD></TR>
    <TR><TD>ifType:</TD>     <TD>ATM IMA (107)</TD></TR>
    <TR><TD>ifName:</TD>     <TD>ATM2/IMA0</TD></TR>
    <TR><TD>Max Speed:</TD>  <TD>768.0 kBytes/s</TD></TR>
  </TABLE>

Garry W. Cook, CCNA
Network Infrastructure Manager
MACTEC, Inc. - http://www.mactec.com/
303.308.6228 (Office) - 720.220.1862 (Mobile)

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list