[mrtg] Assistance needed

[Ana.Moreno at saws.org]

Help.  I get the following error every time I attempt to make a default config file.  I have installed Perl v5.6 since I was informed of an error with Perl v5.8 I have also installed MRTG 2.10.13 and checked that it was not due to firewall issues (OS Win 2K).  We are running SNMPV2 but don't know how to go about changing the cfg file command to indicate otherwise.  Open for suggestions...
 

C:\mrtg-2.10.13\bin>perl cfgmaker public at 10.10.10.1 <mailto:nmsnmpv2rosaws at 10.254.1.1>  --global "workdir: c
:\www\mrtg" --output mrtg.cfg
--base: Get Device Info on public at 10.10.10.1 <mailto:nmsnmpv2rosaws at 10.254.1.1> :
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.10.10.1" [10.10.10.1].161)
                  community: "public"
                 request ID: -78215153
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPWALK Problem for 1.3.6.1.2.1.1 on public at 10.10.10.1::::::v4only <mailto:nmsnmpv2rosaws at 10.254.1.1::::::v4only> 
WARNING: Skipping public at 10.10.10.1 <mailto:nmsnmpv2rosaws at 10.254.1.1> : as no info could be retrieved

--base: Writing mrtg.cfg

 

Thank you,
AL Moreno
210.704.1563

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi