[mrtg] Re: can't get traffice from sub-interface of router

[David Ziemba]

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch 
> [mailto:mrtg-bounce at list.ee.ethz.ch] On Behalf Of MuQ'>|
> Sent: Monday, June 07, 2004 10:07 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] can't get traffice from sub-interface of router
> 

[snippy]

> SNMP Error:
> Received SNMP response with error code
>   error status: noSuchName
>   index 1 (OID: 1.3.6.1.2.1.2.2.1.10.18) SNMPv1_Session 
> (remote host: "192.168.0.1" [192.168.0.1].161)
>                   community: "public"
>                  request ID: 1030702553
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> SNMPGET Problem for ifInOctets.18 ifOutOctets.18 sysUptime 
> sysName on public at 192.168.0.1::::::v4only

We are monitoring an atm interface on a subinterface aal5-layer, looks
like a similar setup anyway:

https://openfire.coloradocollege.edu/cgi-bin/routers2.cgi?uopts=t&rtr=loo_
7206.cfg

Do you have the full pipe, or do you have just a chunk of it you want to
monitor?  We've only got a piece of the line though...

You might want to check out the reply from the device, noSuchName, you
should try adding a .0 or .1 to the end, or just walkin the oid you've
got.

Funny question, but did you try cfgmaker on the device?  The program
walked a 7206VXR here, and it did report the correct interfaces, and the
correct sub interfaces right into a handy config file.

Dave


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi