[mrtg] Fwd: MRTG Config for Cisco 7204 and Cat6506 ... Update ... (bug or feature?)

[Sam Martin]

Curiouser and curiouser ... I created bsc1.bat to start perl mrtg, and despite repeated attempts ( 2 or 3) I couldn't get it running as a daemon, until the last time I tried it.
bsc1 list:
start /b perl mrtg bsc1.cfg --logging bsc1.log
 
C:\mrtg-2.10.5\bin > bsc1
C:\mrtg-2.10.5\bin > Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
 
MRTG appears to be running happily at this time.
Any suggestions on the daemon anomaly?
 

I wrote:Date: Wed, 24 Mar 2004 07:16:55 -0800 (PST)
From: Sam Martin 
Subject: MRTG Config for Cisco 7204 and Cat6506
To: MRTG 

Can U Help?
mrtg 2-10.5 on Windows 2K
I have MRTG monitoring my 7204 w/o issue. I'm using FireDaemon and running it as a service. I want to monitor my Cat6506, but something is wrong ... very wrong ....
1) the log shows mrtg started, but the perl windows doesn't give me the usual warning to the effect that closing this window will mean the terrorists have won ... or something akin.
The window closes by itself after a short time, and the only log entry is that mrtg is started.
I see perl in my process list, but killing it and restarting mrtg as below has no effect.
Any suggestions?
tia/rgds
S
 
perl cfgmaker ****@bsc1 --global "Workdir: C:\Inetpub\wwwroot\mrtg\bsc1" --output bsc1.cfg
start perl mrtg bsc1.cfg --logging bsc1.log
 
Also: a portion of bsc1.cfg
# Created by 
# cfgmaker --ifref=name --ifdesc=name '********@device' --global 'Workdir: C:\Inetpub\wwwroot\mrtg\bsc1' --output device.cfg

### Global Config Options
#  for UNIX
# WorkDir: /home/http/mrtg
#  or for NT
# WorkDir: c:\mrtgdata
Workdir: C:\Inetpub\wwwroot\mrtg\device
RunAsDaemon: Yes
Refresh: 300
### Global Defaults
#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
######################################################################
# System: BSC1_6506
# Description: Cisco Systems WS-C6506
#          Cisco Catalyst Operating System Software, Version 7.1(2)
#          Copyright (c) 1995-2002 by Cisco Systems
#          
# Contact: 
# Location: 
######################################################################

### Interface 1 >> Descr: 'sc0' | Name: 'sc0' | Ip: '192.168.128.40' | Eth: '00-09-44-a8-db-ff' ###
Target[bsc1_sc0]: #sc0:********@bsc1:
SetEnv[bsc1_sc0]: MRTG_INT_IP="192.168.128.40" MRTG_INT_DESCR="sc0"
MaxBytes[bsc1_sc0]: 1250000
Title[bsc1_sc0]: #sc0 -- BSC1_6506
PageTop[bsc1_sc0]: <H1>#sc0 -- BSC1_6506</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BSC1_6506 in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>sc0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>sc0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>192.168.128.40 (bsc1)</TD></TR>
 </TABLE>

### Interface 2 >> Descr: 'sl0' | Name: 'sl0' | Ip: '0.0.0.0' | Eth: '00-00-00-00-00-00' ###
Target[bsc1_sl0]: #sl0:********@bsc1:
SetEnv[bsc1_sl0]: MRTG_INT_IP="0.0.0.0" MRTG_INT_DESCR="sl0"
MaxBytes[bsc1_sl0]: 1200
Title[bsc1_sl0]: #sl0 -- BSC1_6506
PageTop[bsc1_sl0]: <H1>#sl0 -- BSC1_6506</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BSC1_6506 in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>sl0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>slip (28)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>sl0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1200.0 Bytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>0.0.0.0 (RWOCA3)</TD></TR>
 </TABLE>

### Interface 3 >> Descr: '' | Name: '1/1' | Ip: '' | Eth: '00-01-64-15-d4-6e' ###
### The following interface is commented out because:
### * it is operationally DOWN
# 
<cut>
### Interface 4 >> Descr: '' | Name: '1/2' | Ip: '' | Eth: '00-01-64-15-d4-6f' ###
### The following interface is commented out because:
### * it is operationally DOWN
# 
<cut>
### Interface 5 >> Descr: 'VLAN-1' | Name: 'VLAN-1' | Ip: '' | Eth: '00-09-44-a8-d8-00' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
<cut>
### Interface 6 >> Descr: 'VLAN-1002' | Name: 'VLAN-1002' | Ip: '' | Eth: '00-09-44-a8-db-e9' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
<cut>
### Interface 7 >> Descr: 'VLAN-1004' | Name: 'VLAN-1004' | Ip: '' | Eth: '00-09-44-a8-db-eb' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
<cut>

### Interface 8 >> Descr: 'VLAN-1005' | Name: 'VLAN-1005' | Ip: '' | Eth: '00-09-44-a8-db-ec' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
# 
<cut>

### Interface 11 >> Descr: '' | Name: '2/2' | Ip: '' | Eth: '00-02-7e-e2-56-01' ###
Target[bsc1_2_2]: #2/2:********@bsc1:
SetEnv[bsc1_2_2]: MRTG_INT_IP="" MRTG_INT_DESCR=""
MaxBytes[bsc1_2_2]: 125000000
Title[bsc1_2_2]: #2/2 -- BSC1_6506
PageTop[bsc1_2_2]: <H1>#2/2 -- BSC1_6506</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>BSC1_6506 in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>2/2</TD></TR>
   <TR><TD>Port Name:</TD>  <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>125.0 MBytes/s</TD></TR>
 </TABLE>
 


Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.


Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi