[mrtg] Re: Cisco Pix monitor

[Paul Hong]

Hi Matt,
Thanks for the Reply.

I am running MRTG bundle 2.

http://www.open-innovations.com/mrtgbundle.html

How do I change ifref=name to ifref=descry?
I tried changing it manually in the .cfg and it did not work.

Thanks,

_______________________________________________ 
  

 Paul Hong


-----Original Message-----
From: Matthew Petach [mailto:mpetach at yahoo.com] 
Sent: Saturday, November 06, 2004 10:58 AM
To: Paul Hong; 'Stefano Giraldo'; mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Re: Cisco Pix monitor

--- Paul Hong <phong at mbcsystems.org> wrote:
> Thanks Stefano for your response.
> How do I change the ifref=name?

consider using ifref=descr instead of ifref=name in
cases like this.

Matt


> _______________________________________________ 
>   
> 
>  Paul Hong
> 
> 
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
> Behalf Of Stefano Giraldo
> Sent: Wednesday, November 03, 2004 2:22 AM
> To: Paul Hong; mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Cisco Pix monitor
> 
> Hi,
> on my Cisco PIX 520 with 6.3(1) PIX Software, I did
> cfgmaker --global 'WorkDir: /var/www/mrtg' --ifref=name
> community at outside_pix_interface:::::2
> (obviously on Linux) and it worked fine.
> So, the error it's enough eloquent, it seems you have two interfaces with
> the same name.
> Hope my suggestions will useful.
> 
> Bye,
> 
>         Ste.
> 
> ----- Original Message ----- 
> From: "Paul Hong" <phong at mbcsystems.org>
> To: <mrtg at list.ee.ethz.ch>
> Sent: Tuesday, November 02, 2004 8:02 PM
> Subject: [mrtg] Cisco Pix monitor
> 
> 
> > Hi all.
> > I got my snmp for cisco pix setup, but when I run updatemyrouter.bat.
> >
> > I get this .cfg file.
> >
> >
> >
> > ### Interface 1 >> Descr: 'PIX-Firewall-'outside'-interface' | Name: ''
|
> > Ip: '207.215.60.67' | Eth: '00-50-54-ff-34-12' ###
> >
> > ### The following interface is commented out because:
> >
> > ### * --ifref=name is not unique for this interface
> >
> >
> >
> > Any response would be greatly appreciated.
> >
> >
> >
> > Paul Hong
> >
> >
> >
> > --
> > Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> > Archive     http://www.ee.ethz.ch/~slist/mrtg
> > FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> > WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> >
> >
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi