[mrtg] Re: MRTG and ISA server

[Garth Williams]

On ISA server, you need to configure a packet filter to allow UDP port
161 in and out from the internal network.

*

I tried running getif on the ISA server itself and there was no response
at all. I suspect that it has to do with security settings within ISA
itself, or perhaps MIB files that are incorrect.

*

Did you try to run getif (or any other snmp utility) on the same box
(localhost or 127.0.0.1)? 

*

I have checked the SNMP service configuration. I have tested it 
with listed hosts and with "from any hosts." I have made sure 
that the xp firewall is disabled. The service is running on the 
ISA server and Getif does return some data but only identifies 
one of the three nic cards in the server. 

-----Original Message----- 
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] 
On Behalf Of William Owen 
Sent: Wednesday, October 06, 2004 10:09 AM 
To: mrtg at list.ee.ethz.ch 
Subject: [mrtg] Re: MRTG and ISA server 

You might want to check your SNMP service configuration.  By 
default, Win2k and Win2k3 server will respond to only to hosts 
listed in the security tab (localhost by default).  If you have 
"from these hosts" selected, you MUST have your monitoring 
server listed.  Also, if you use a NetBIOS or DNS name here, 
your server must be able to resolve the name.  To alleviate 
both of these issues, you can use the "from any host" to test. 

-----Original Message----- 
From: Garth Williams [mailto:garth.williams at acrodex.com] 
Sent: Tuesday, October 05, 2004 5:55 PM 
To: rglauser at areaofficeonaging.com; mrtg at list.ee.ethz.ch 
Subject: [mrtg] Re: MRTG and ISA server 

http://www.loriotpro.com/Service&Support/How_to/InstallWXPAgent_EN.php 

* 

Neither mib walker is on a server. One is on W2K pro and the 
other XP. I am not aware of any way to place an ACL on the snmp 
service running on a server. 

* 

Is Solarwinds on another server than GetIf? 
If so, then perhaps the SNMP service on the target is set to 
allow SNMP access from the Getif server and not the SolarWindws service.


* 

Yes the solarwinds mib walker is polling on UDP port 161 and 
can successfully poll other serers. 

* 

Is your SNMP poll/walk/whatever from Solarwinds on the same UDP 
port as GetIf?  Or does it poll on another port?  Can you use 
Solarwindws to poll another server to verify settings? 

* 

I am having a problem setting up MRTG on ISA server 2000. <SNIP> 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi