[mrtg] D-Link 2000AP is OK but 21000AP is not

[Ali Ba]

Hi,

I am new to MRTG.
I installed it to monitor the traffic going through wireless APs. It is 
working fine with D-Link 2000APs, but I am not receiving any data from 
D-Link2100APs. I received no errors when I created the cfg files. However, 
the 2100AP graphs shows nothing. Everything seems to be worknig fine but no 
data from 2100APs (the graphs for 2000APs show traffic).

D-Link support pages read "The DWL-2100AP Wireless Access Point also 
supports SNMP v.3".

I am running MRTG on a Windows 2003 server.

Any idea?

I put the cfg of a 2100AP down in this message in case anyone ants to take a 
look at it.

Thanks



2100AP cfg
---------------------------------
# Created by
# cfgmaker public at 192.168.0.14 --global 'WorkDir: c:\mrtg-2.10.5\www' 
--output mrtg14.cfg


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no

######################################################################
# System: D-Link Corp. Access Point
# Description: D-Link Corp. Access Point
# Contact:
# Location:
######################################################################


### Interface 1 >> Descr: 'Wireless-802.11G' | Name: '' | Ip: '192.168.0.14' 
| Eth: '' ###

Target[192.168.0.14_1]: 1:public at 192.168.0.14:
SetEnv[192.168.0.14_1]: MRTG_INT_IP="192.168.0.14" 
MRTG_INT_DESCR="Wireless-802.11G"
MaxBytes[192.168.0.14_1]: 6750000
Title[192.168.0.14_1]: Traffic Analysis for 1 -- D-Link Corp. Access Point
PageTop[192.168.0.14_1]: <H1>Traffic Analysis for 1 -- D-Link Corp. Access 
Point</H1>
<TABLE>
   <TR><TD>System:</TD>     <TD>D-Link Corp. Access Point in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Wireless-802.11G  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>6750.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>192.168.0.14 ()</TD></TR>
</TABLE>


### Interface 2 >> Descr: 'Ethernet' | Name: '' | Ip: '' | Eth: '' ###

Target[192.168.0.14_2]: 2:public at 192.168.0.14:
SetEnv[192.168.0.14_2]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet"
MaxBytes[192.168.0.14_2]: 12500000
Title[192.168.0.14_2]: Traffic Analysis for 2 -- D-Link Corp. Access Point
PageTop[192.168.0.14_2]: <H1>Traffic Analysis for 2 -- D-Link Corp. Access 
Point</H1>
<TABLE>
   <TR><TD>System:</TD>     <TD>D-Link Corp. Access Point in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Ethernet  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
</TABLE>

RunAsDaemon: yes
WorkDir: c:\mrtg-2.10.15\www

-----------------------------------

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar – get it now! 
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi