[mrtg] Re: MRTG and APC UPS

[Pavleck, Jeremy]

All the OIDs you seek for your PowerNet can be found on APC's FTP at
ftp://ftp.apcc.com/apc/public/software/pnetmib/mib/

Download the mibs, load em up in GetIf, and start poking around.
http://www.snmp4tpc.com will have the info you're looking for with
regards to MRTG on Win32

Good luck to you!

 Jeremy D Pavleck
 Capella University (Capella.Edu)
 System Administrator - Systems Management
 IT Operations
 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Nicolas Raddatz
Sent: Thursday, September 16, 2004 5:05 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] MRTG and APC UPS

Hi all,

I want to monitor my APC Smart-UPS RT 5000 XL and APC Environmental
Management System (EMS) AP 9320 using MRTG (Windows Platform). I've
researched quite a lot, but still have some problems.

Do you know what OIDs are available for them? Or maybe an example MRTG
cfg file? I have found the following for the UPS:

Runtime in minutes: 1.3.6.1.4.1.318.1.1.1.2.2.3.0 Unfortunately, the
retrieved value is of no use, since MRTG doesn't understand what
'0:30:00' means (30 minutes) and I get a nice ERROR:
Target[ups_1][_IN_] ' $$target[0]{$mode} ' did not eval into defined
data I could do a script to parse this, and have been investigating, I
found a snmpget for Windows (net-snmp), but haven't been able to get
anything from the UPS via command line. Strange. Using getif I can
connect to it via SNMP.

Temperature (celcius): 1.3.6.1.4.1.318.1.1.1.2.2.2.0 It "seems" to work
(no error) but all I get is 0.

Voltage (volts): 1.3.6.1.4.1.318.1.1.1.4.2.1.0 It "seems" to work (no
error) but all I get is 0.

Any help will be greatly appreciated. I'm sure someone out there has
solved this before.


Thanks.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi