[mrtg] Re: Maximum Bytes

[Gary Smith]

Well, for maximum bytes on the T1 at 1.54mb we use 193000.  The rule of
thumb is divide by 8.  Your 10mbit connection should be 1,250,000.
100mbit should be 10x that, 1gbit should be 100x that.

Gary


> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On
> Behalf Of rglauser at areaofficeonaging.com
> Sent: Wednesday, September 29, 2004 8:51 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Maximum Bytes
> 
> In a basic MRTG graph, what are the correct settings to measure a 10
> Base T, 100 Base T and gigabit port on a switch?
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi