[mrtg] Re: OID bridge Proxim

[Villafuerte Icaza Rodolfo Eduardo]

Excellent...

I leave out the "bits" option and graph with the normal values...

Is possible graph negative values? 

-----Mensaje original-----
De: Koelstra, J. (Jan) [mailto:JKoelstra at MINSZW.NL] 
Enviado el: Martes, 19 de Abril de 2005 02:40 a.m.
Para: Villafuerte Icaza Rodolfo Eduardo; mrtg at list.ee.ethz.ch
Asunto: RE: [mrtg] Re: OID bridge Proxim


Hi,

I think you should leave out the 'bits' at the options line.
The 'bits' option is used to convert the number of octets into the number of
single bits.


Hth,

Jan.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of Villafuerte Icaza Rodolfo Eduardo
Sent: Monday, April 18, 2005 6:59 PM
To: Steve Haavik; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: OID bridge Proxim


Finally i can graph thats OIDs with the " * -1".... 700 vs 300 aprox (???)

When i query the snmp OID i obtain 217, 218, 216 ...(positive) But when  i
use another tool snmp, for the same OID i obtain other values, the query
obtain -40, -39, -41 ...

Why show diferent values?


workdir: D:\mrtgdata
PathAdd: c:\mrtg\rrdtool
LogFormat: rrdtool

ShortLegend[_]: dBm
Options[_]: gauge,growright,nopercent,bits
WithPeak[_]: ywm
Unscaled[_]:
YLegend[_]: Signal Level - dB(m)
LegendI[_]: Local Rx Level
LegendO[_]: Local Tx Level
Legend1[_]: Local Unit Rx Level in dBm
Legend2[_]: Local Unit Tx Level in dBm
Legend3[_]: Local Rx Max value per interval on graph
Legend4[_]: Local Tx Max value per interval on graph
Target[radio_local_signal]:
1.3.6.1.4.1.11898.2.1.2.5.2.1.2.3&1.3.6.1.4.1.11898.2.1.2.5.2.1.3.3:xxx at 1.1.
1.1 * -1
MaxBytes[radio_local_signal]: 8000
Title[radio_local_signal]: Local Signal Levels - radio



-----Mensaje original-----
De: Steve Haavik [mailto:shaavik at soc.lib.md.us]

Enviado el: Lunes, 18 de Abril de 2005 10:00 a.m.
Para: mrtg at list.ee.ethz.ch
Asunto: [mrtg] Re: OID bridge Proxim

On Mon, 18 Apr 2005, Melih Turan wrote:

> Thanks for the solution, however I am not using rrd. But since I am 
> using a minus sign the result  in the log file is true. On the other

> hand, I configure the config file as to get only the Signal part.

> However it still does not give an expected graph.

Oh, I missed that. Try this for your target.

Target[snr]:
.1.3.6.1.4.1.11898.2.1.2.5.2.1.2.3&.1.3.6.1.4.1.11898.2.1.2.5.2.1.2.3:commun
ity at x.x.x.x * -1


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi


_________________________________________________________

Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke
aansprakelijkheid uit in verband met het niet juist, onvolledig of niet
tijdig overkomen van de informatie in deze e-mail.
Aan dit bericht kunnen geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet
voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de
inhoud van dit bericht te vernietigen.
_________________________________________________________

The ministry of Social Affairs and Employment is not liable for any
incorrect or incomplete transmission of the information in this e-mail or
for any delay in its receipt.
This message shall not constitute any obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and
delete its content.
_________________________________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi